ESM(4) - Device Drivers Manual (i386) # ESM(4) - Device Drivers Manual (i386)
NAME # esm - Dell Embedded Server Management
SYNOPSIS # esm0 at mainbus?
DESCRIPTION # The esm driver provides support for the monitoring of the environmental sensors present in a variety of Dell servers. The hardware monitoring is accessed via the hw.sensors sysctl(8) variable.
Devices compatible with the esm driver can provide an arbitrary set of sensors which may include the following types:
...
ETHERIP(4) - Device Drivers Manual # ETHERIP(4) - Device Drivers Manual
NAME # etherip - EtherIP tunnel interface
SYNOPSIS # pseudo-device etherip
DESCRIPTION # The etherip interface is a pseudo-device for tunnelling Ethernet frames across IP[46] networks using RFC 3378 EtherIP encapsulation.
An etherip interface can be created using the ifconfig etherip‌N create command or by setting up a hostname.if(5) configuration file for netstart(8). It must be configured with the addresses used for the outer header.
...
FCU(4) - Device Drivers Manual (macppc) # FCU(4) - Device Drivers Manual (macppc)
NAME # fcu - Apple Fan Control Unit sensor device
SYNOPSIS # fcu* at iic?
DESCRIPTION # The fcu driver provides support for the Apple Fan Control Unit (FCU). The device controls and monitors fans found in some Apple machines. Fan speed readings and PWM settings are made available through the sysctl(8) interface.
SEE ALSO # iic(4), intro(4), sensorsd(8), sysctl(8)
...
FHC(4) - Device Drivers Manual (sparc64) # FHC(4) - Device Drivers Manual (sparc64)
NAME # fhc - SPARC64 FireHose controller
SYNOPSIS # fhc* at central? fhc* at mainbus0
DESCRIPTION # The fhc device provides support for the FireHose controllers found on Sunfire, Starfire, and Wildfire UltraSPARC systems. These devices are used for board level functions on these systems. This device also controls an LED for each slot. This LED can be made to blink based on the load average on most systems by setting the sysctl(2) variable machdep.
...
FINS(4) - Device Drivers Manual # FINS(4) - Device Drivers Manual
NAME # fins - Fintek F71805F LPC Super I/O
SYNOPSIS # fins0 at isa? port 0x4e
DESCRIPTION # The fins driver provides support for the Fintek F71805F, F71806, F71862, and F71882 LPC Super I/O ICs.
The hardware monitor provides hardware monitoring capabilities to be used with the sysctl(8) interface.
The F71805F hardware monitor supports 15 sensors:
**Sensor** **Units** **Typical Use** `IN0` uV DC Internal 3.
...
FINTEK(4) - Device Drivers Manual # FINTEK(4) - Device Drivers Manual
NAME # fintek - Fintek F75375 temperature sensor
SYNOPSIS # fintek* at iic? flags 0x0000
DESCRIPTION # The fintek driver provides support for the Fintek F75375 temperature sensor and fan controller. The sensor possesses a collection of sensor values which are made available through the sysctl(8) interface:
$ sysctl hw.sensors.fintek0 hw.sensors.fintek0.temp0=31.00 degC hw.sensors.fintek0.temp1=29.00 degC hw.sensors.fintek0.fan0=0 RPM hw.sensors.fintek0.fan1=0 RPM hw.
...
Who,
Syslogd,
Login.conf,
Login,
Chroot,
Proxy,
Sysctl,
Shells,
Inetd,
Pwd_mkdb,
Motd,
Services,
Ftp,
Ctime,
Group,
Skey,
Ftpd FTPD(8) - System Manager’s Manual # FTPD(8) - System Manager’s Manual
NAME # ftpd - Internet File Transfer Protocol server
SYNOPSIS # ftpd [-46ADdlMnPSUW] [-m minuid] [-T maxtimeout] [-t timeout] [-u mask]
DESCRIPTION # ftpd is the Internet File Transfer Protocol server process. The server uses the TCP protocol and listens at the port specified in the “ftp” service specification; see services(5).
The options are as follows:
-4
When -D is specified, forces ftpd to use IPv4 addresses only.
...
GEODESC(4) - Device Drivers Manual (i386) # GEODESC(4) - Device Drivers Manual (i386)
NAME # geodesc - Geode SC1100/SCx200 IAOC watchdog timer device
SYNOPSIS # geodesc* at pci?
DESCRIPTION # The geodesc driver supports the watchdog timer of the Geode SC1100.
The Geode SC1100/SCx200 is a member of the AMD Information Appliance On a Chip (IAOC) family of fully integrated x86 system chips.
The watchdog timer may be configured via sysctl(8).
...
GIF(4) - Device Drivers Manual # GIF(4) - Device Drivers Manual
NAME # gif - generic tunnel interface
SYNOPSIS # pseudo-device gif
DESCRIPTION # The gif interface is a generic tunnelling pseudo-device. It can tunnel IPv4, IPv6, and MPLS over IPv4 and IPv6, with behavior mainly based on RFC 4213 IPv6-over-IPv4.
A gif interface can be created at runtime using the ifconfig gif‌N create command or by setting up a hostname.
...
GLENV(4) - Device Drivers Manual # GLENV(4) - Device Drivers Manual
NAME # glenv - Genesys Logic GL518SM temperature, voltage, and fan sensor
SYNOPSIS # glenv* at iic?
DESCRIPTION # The glenv driver provides support for the Genesys Logic GL518SM hardware monitor to be used with the sysctl(8) interface.
The GL518SM possesses a voltage sensor, a temperature sensor and two fan speed sensors.
SEE ALSO # iic(4), intro(4), sensorsd(8), sysctl(8)
...