Rpc.bootparamd,
Exports,
Tcpdump,
Mygate,
Myname,
Rbootd,
Mopd,
Portmap,
Rarpd,
Hostname.if,
Mountd,
Bootparams,
Pxeboot,
Fstab,
Hosts,
Nfsd,
Tftpd,
Dhcpd.conf,
Ethers,
Dhcpd,
Diskless DISKLESS(8) - System Manager’s Manual # DISKLESS(8) - System Manager’s Manual
NAME # diskless - booting a system over the network
DESCRIPTION # The ability to boot a machine over the network is useful for diskless or dataless machines, or as a temporary measure while repairing or re-installing filesystems on a local disk. This file provides a general description of the interactions between a client and its server when a client is booting over the network.
...
EXPORTS(5) - File Formats Manual # EXPORTS(5) - File Formats Manual
NAME # exports - define remote mount points for NFS mount requests
DESCRIPTION # The exports file specifies remote mount points for the NFS mount protocol per the NFS server specification; see Network File System Protocol Specification, RFC 1094, Appendix A and NFS: Network File System Version 3 Specification, RFC 1813, Appendix I.
Each line in the file (other than comment lines that begin with a “#”) specifies the mount point(s) and export flags within one local server filesystem for one or more hosts.
...
MOUNTD(8) - System Manager’s Manual # MOUNTD(8) - System Manager’s Manual
NAME # mountd - service remote NFS mount requests
SYNOPSIS # mountd [-d] [exportsfile]
DESCRIPTION # mountd is the server for NFS mount requests from other client machines. mountd listens for service requests at the port indicated in the NFS server specification; see Network File System Protocol Specification, RFC 1094, Appendix A and NFS: Network File System Version 3 Protocol Specification, RFC 1813, Appendix I.
...
NFSD(8) - System Manager’s Manual # NFSD(8) - System Manager’s Manual
NAME # nfsd - remote NFS server
SYNOPSIS # nfsd [-rtu] [-n num_servers]
DESCRIPTION # nfsd runs on a server machine to service NFS requests from client machines. At least one nfsd must be running for a machine to operate as a server.
Unless otherwise specified, four servers for UDP transport are started.
The options are as follows:
...
SHOWMOUNT(8) - System Manager’s Manual # SHOWMOUNT(8) - System Manager’s Manual
NAME # showmount - show remote NFS mounts on host
SYNOPSIS # showmount [-3ade] [host]
DESCRIPTION # showmount shows status information about the NFS server on host. By default it prints the names of all hosts that have NFS file systems mounted on the host. See NFS: Network File System Protocol Specification, RFC 1094, Appendix A, and NFS: Network File System Version 3 Protocol Specification, Appendix I, for a detailed description of the protocol.
...