LDPCTL(8) - System Manager’s Manual # LDPCTL(8) - System Manager’s Manual
NAME # ldpctl - control the LDP routing daemon
SYNOPSIS # ldpctl command [argument …]
DESCRIPTION # The ldpctl program controls the ldpd(8) daemon. Commands may be abbreviated to the minimum unambiguous prefix; for example, s i for show interfaces.
The following commands are available:
clear neighbors [address]
Delete entries from the neighbor table. address can be used to limit the scope of the command to the given neighbor.
...
LDPD.CONF(5) - File Formats Manual # LDPD.CONF(5) - File Formats Manual
NAME # ldpd.conf - LDP routing daemon configuration file
DESCRIPTION # The ldpd(8) daemon implements the Label Distribution Protocol as described in RFC 5036.
The ldpd.conf config file is divided into the following main sections:
Macros
User-defined variables may be defined and used later, simplifying the configuration file.
Global Configuration
Global settings for ldpd(8).
Address-Family Configuration
Address-family specific parameters.
...
LDPD(8) - System Manager’s Manual # LDPD(8) - System Manager’s Manual
NAME # ldpd - Label Distribution Protocol (LDP) routing daemon
SYNOPSIS # ldpd [-dnv] [-D macro=value] [-f file] [-s socket]
DESCRIPTION # ldpd is the Label Distribution Protocol (LDP) daemon, which distributes MPLS label mappings between routers.
A running ldpd can be controlled with the ldpctl(8) utility.
The options are as follows:
-D macro=value
Define macro to be set to value on the command line.
...