MUE(4) - Device Drivers Manual # MUE(4) - Device Drivers Manual
NAME # mue - Microchip LAN75xx/LAN78xx 10/100/1Gb USB Ethernet device
SYNOPSIS # mue* at uhub? ukphy* at mii?
DESCRIPTION # The mue driver supports Microchip LAN7500/LAN7505/LAN7515/LAN7850 USB 2.0 Gigabit Ethernet devices and LAN7800/LAN7801 USB 3.0 Gigabit Ethernet devices, including the following:
Microchip EVB-LAN7800LC
Z-TEK ZE582
For more information on configuring this device, see ifconfig(8).
SEE ALSO # arp(4), ifmedia(4), intro(4), netintro(4), ukphy(4), usb(4), hostname.
...
MVNETA(4) - Device Drivers Manual # MVNETA(4) - Device Drivers Manual
NAME # mvneta, mvmdio - Marvell ARMADA Ethernet device
SYNOPSIS # mvmdio* at fdt? mvneta* at fdt? eephy* at mii?
DESCRIPTION # The mvneta driver provides support for the Ethernet controller on the Marvell ARMADA 37x, 38x and 37xx series SoCs. Access to the MDIO bus is provided by the mvmdio driver. For more information on configuring this device, see ifconfig(8).
...
MVPP(4) - Device Drivers Manual # MVPP(4) - Device Drivers Manual
NAME # mvpp, mvppc - Marvell ARMADA Ethernet device
SYNOPSIS # mvppc* at fdt? mvpp* at mvppc?
DESCRIPTION # The mvpp driver provides support for the Ethernet controller on the Marvell ARMADA 70x0 and 80x0 series SoCs. For more information on configuring this device, see ifconfig(8).
SEE ALSO # ifmedia(4), mii(4), hostname.if(5), ifconfig(8)
HISTORY # The mvpp driver first appeared in OpenBSD 6.
...
MYGATE(5) - File Formats Manual # MYGATE(5) - File Formats Manual
NAME # mygate - default gateway
DESCRIPTION # The mygate file is read by netstart(8) at system startup time.
/etc/mygate, if it exists, contains the address of the gateway host. The gateway is added to the routing tables by the route(8) utility. If /etc/mygate does not exist, no default gateway is added to the routing tables. The file may contain gateway addresses for both IPv4 and IPv6 networks in dotted quad notation for v4 (e.
...
MYNAME(5) - File Formats Manual # MYNAME(5) - File Formats Manual
NAME # myname - default hostname
DESCRIPTION # The myname file is read by rc(8) at system startup time.
/etc/myname contains the symbolic name of the host machine. The file should contain a single line specifying the fully qualified domain name (FQDN) of the system (e.g. host.example.com). The name must be resolvable, either by matching a hostname specified in /etc/hosts (see hosts(5)) or through DNS (see resolv.
...
MYX(4) - Device Drivers Manual # MYX(4) - Device Drivers Manual
NAME # myx - Myricom Myri-10G PCI Express 10Gb Ethernet device
SYNOPSIS # myx* at pci?
DESCRIPTION # The myx driver supports the Myricom Myri-10G PCI Express 10Gb Ethernet adapters based on the Myricom Lanai-Z8E and Lanai-Z8ES chipsets, including the following:
Myricom 10G-PCIE-8A-C Adapter (10GbaseCX4) Myricom 10G-PCIE-8A-R Adapter (10GbaseSR/LR) Myricom 10G-PCIE-8A-Q Adapter (10G XAUI) Myricom 10G-PCIE2-8B2-2S Adapter (10GbaseSR/LR) Myricom 10G-PCIE2-8C2-2S Adapter (10GbaseSR/LR/LRM) Low profile versions are supported as well.
...
Pcmcia,
Intro,
Pci,
Ifmedia,
Netintro,
Lxtphy,
Nsphyter,
Ifconfig,
Hostname.if,
Isapnp,
Bmtphy,
Isa,
Acphy,
Ne NE(4) - Device Drivers Manual # NE(4) - Device Drivers Manual
NAME # ne - NE2000 and compatible 10/100 Ethernet device
SYNOPSIS # ne0 at isa? port 0x240 irq 9 ne1 at isa? port 0x300 irq 10 ne2 at isa? port 0x280 irq 9 ne* at isapnp? ne* at pci? ne* at pcmcia? acphy* at mii? bmtphy* at mii? lxtphy* at mii? nsphyter* at mii?
DESCRIPTION # The ne device driver supports NE2000 and compatible (including NE1000) Ethernet cards, including:
...
NEP(4) - Device Drivers Manual # NEP(4) - Device Drivers Manual
NAME # nep - Sun Neptune 10Gb Ethernet device
SYNOPSIS # nep* at pci? brgphy* at mii?
DESCRIPTION # The nep driver provides support for various NICs based on the Sun Neptune Ethernet controller chips, including the following:
Sun Quad GbE UTP x8 PCI Express Card Sun Quad GbE UTP x8 PCIe ExpressModule It uses an internal or external PHY or an external 10-bit interface.
...
NETSTART(8) - System Manager’s Manual # NETSTART(8) - System Manager’s Manual
NAME # netstart - network startup script
SYNOPSIS # sh /etc/netstart [-n] [interface …]
DESCRIPTION # netstart is a sh(1) script invoked by rc(8) during an automatic reboot and after single-user mode is exited; it performs network initialization.
netstart can also be used to start newly created interfaces. Its behaviour is controlled to some extent by variables defined in rc.
...
Intro,
Pci,
Atphy,
Arp,
Ifmedia,
Netintro,
Brgphy,
Rgephy,
Icsphy,
Ifconfig,
Rlphy,
Ciphy,
Eephy,
Hostname.if,
Nfe NFE(4) - Device Drivers Manual # NFE(4) - Device Drivers Manual
NAME # nfe - NVIDIA nForce MCP 10/100/1Gb Ethernet device
SYNOPSIS # nfe* at pci? atphy* at mii? brgphy* at mii? ciphy* at mii? eephy* at mii? icsphy* at mii? rgephy* at mii? rlphy* at mii?
DESCRIPTION # The nfe driver supports Fast Ethernet and Gigabit Ethernet adapters based on the NVIDIA nForce Media and Communications Processors (MCP), the nForce, nForce 2, nForce 3, CK804, MCP04, MCP51, MCP55, MCP61, MCP65, MCP67, MCP73, MCP77, MCP79 and MCP89 Ethernet controller chips.
...