nono-1.8.1

+-----------------------------------------------------------------------
| Running NetBSD on nono
+-----------------------------------------------------------------------

From nono's manual to run NetBSD, you need to create a directory
with your disk and config:

$ mkdir ~/nono

You can download the liveimage of NetBSD from
http://teokurebsd.org/netbsd/liveimage/20200518-luna68k/ and place it
on ~/nono

The config file nono.cfg inside ~/nono should be like:

vmtype = luna
spc0-id6-image = hd,liveimage-luna68k-raw-20200518.img

Now run nono specifying ~/nono:

$ nono -c ~/nono

Now inside the console, you should follow these instructions:

k
[Enter]
[Enter]
d
boot
g
x

For more options you should read the manual.

+-----------------------------------------------------------------------
| Running OpenBSD on nono
+-----------------------------------------------------------------------

Currently nono's luna88k emulation is under construction, but aoyama@
buildis a custom image for nono.

You should refer to the README file in:

http://www.nk-home.net/~aoyama/liveimage/

To boot OpenBSD on nono.

The config file nono.cfg inside ~/nono should be like:

vmtype = luna88k
spc0-id6-image = hd,liveimage-luna88k-raw-20210614.img
hostnet-driver = none

To turn it on:

$ nono -c ~/nono -s 0.5 -C

Now inside the console you should follow these instructions:

** NVRAM Initialized.

N>nvram boot_filename boot
Update boot_filename : "vmunix" -> "boot" (Y/[N]):y
Updated
N>b

You can connect to the vm with a serial console by
adding the following to your nono.cfg:

hostcom-driver = tcp
hostcom-tcp-port = 9999
luna-dipsw1 = 10111111

Then, after staring nono, try:

$ telnet localhost 9999