DHCPv4/IPv4LL/IPv6RS/DHCPv6 quad stack client
Project homepage: https://roy.marples.name/projects/dhcpcd
Description
dhcpcd is a DHCPv4/IPv4LL/IPv6RS/DHCPv6 quad stack client.
It will listen for new interfaces and carrier signals from the kernel
so it can quickly configure each interface as it appears.
dhcpcd has a powerful DHCP expression engine which makes it easy
to decode future RFC DHCP options, or handroll your own.
Package information
- Ports path
- net/dhcpcd
- Package architecture
- amd64
- Maintainer
- Stuart Henderson <stu.ports@spacehopper.org>
- Categories
- net
- Available flavors
- None listed
- Only for architectures
- aarch64, amd64, arm, i386, mips64, mips64el, powerpc, powerpc64, riscv64, sparc64, alpha, hppa
Ports list build and test dependencies as well as runtime dependencies. pkg_add selects those needed for installation.
Direct dependencies
Build
- archivers/xz STEM->=5.4.0
OpenBSD README
+-----------------------------------------------------------------------
| Running dhcpcd on OpenBSD
+-----------------------------------------------------------------------
DHCPv6-PD (Prefix Delegation)
=============================
One common use of this package is to request Prefix Delegation from
an ISP, which hands you one or more routable IPv6 subnet that can be
assigned to interfaces facing your local network.
Here is a sample configuration achieving this, fetching addresses over the
pppoe0 interface and assigning it to multiple local networks.
Also ensure that pf.conf(5) allows DHCPv6 traffic to pass, for example:
pass out quick on pppoe0 proto udp from port dhcpv6-client \
to port dhcpv6-server received-on none
pass in quick on pppoe0 proto udp from port dhcpv6-server \
to fe80::/10 port dhcpv6-client
As usual with IPv6, you will also need to allow address resolution
(with IPv6 this is done "in band" using icmp6 packets which must be allowed
to pass PF - with IPv4 this is done by ARP which is ignored by PF).
-- -- -- -- -- --
ipv6only
noipv6rs
duid
persistent
option rapid_commit
require dhcp_server_identifier
# disable running any hooks; not typically required for simple DHCPv6-PD setup
script ""
# List interfaces explicitly so that dhcpcd doesn't touch others
allowinterfaces pppoe0 em0 vlan3 vlan5
interface pppoe0
# the following two lines tell dhcpcd to do router solicitation
# itself. don't use them if using "inet6 autoconf" (slaacd)
ipv6rs
ia_na 1
# request prefixes from the provider to use for downstream networks
ia_pd 2 em0/1 vlan3/2 vlan5/3
-- -- -- -- -- --
(By default, dhcpcd will request a prefix length that is the largest
multiple of 8 that fits the networks. In some unusual cases, the
provider may require a specific prefix length hint instead; to
modify the above example for such a provider,
"ia_pd 2/::/48 em0/1 vlan3/2 vlan5/3").
In normal cases, you would use rad(8) to advertise these prefixes to
clients. Put the following in /etc/rad.conf:
-- -- -- -- -- --
interface em0
interface vlan3
interface vlan5
-- -- -- -- -- --
And enable rad(8):
# rcctl enable rad