EEPROM(8) - System Manager's Manual

EEPROM(8) - System Manager’s Manual #

EEPROM(8) - System Manager’s Manual

NAME #

eeprom - display or modify contents of the OpenPROM

SYNOPSIS #

eeprom [-pv] [-f device] [field[=value] ]

DESCRIPTION #

eeprom provides an interface for displaying and changing the contents of the OpenPROM. Without any arguments, eeprom will list all of the known fields and their corresponding values. When given the name of a specific field, eeprom will display that value or set it if the field name is followed by ‘=’ and a value. Only the superuser may modify the contents of the OpenPROM.

The options are as follows:

-

Commands are taken from stdin and displayed on stdout.

-f device

Use device instead of the default /dev/openprom.

-p

Display the tree derived from the OpenPROM and exit.

-v

Be verbose when setting a value.

FIELDS AND VALUES #

Since the OpenPROM is designed such that the field names are arbitrary, explaining them here is dubious. Below are field names and values that one is likely to see. NOTE: this list may be incomplete or incorrect due to differences between revisions of the OpenPROM.

sunmon-compat?

If true, the old EEPROM-style interface will be used while in the monitor, rather than the OpenPROM-style interface.

selftest-#megs

A 32-bit integer specifying the number of megabytes of memory to test upon power-up.

oem-logo

A 64bitx64bit bitmap in Sun Iconedit format. To set the bitmap, give the pathname of the file containing the image. NOTE: this property is not yet supported.

oem-logo?

If true, enables the use of the bitmap stored in oem-logo rather than the default Sun logo.

oem-banner

A string to use at power-up, rather than the default Sun banner.

oem-banner?

If true, enables the use of the banner stored in oem-banner rather than the default Sun banner.

ttya-mode

A string of five comma separated fields in the format “9600,8,n,1,-”. The first field is the baud rate. The second field is the number of data bits. The third field is the parity; acceptable values for parity are “n” (none), “e” (even), “o” (odd), “m” (mark), and “s” (space). The fourth field is the number of stop bits. The fifth field is the “handshake” field; acceptable values are “-” (none), “h” (RTS/CTS), and “s” (XON/XOFF).

ttya-rts-dtr-off

If true, the system will ignore RTS/DTR.

ttya-ignore-cd

If true, the system will ignore carrier detect.

ttyb-mode

Similar to ttya-mode, but for ttyb.

ttyb-rts-dtr-off

Similar to ttya-rts-dtr-off, but for ttyb.

ttyb-ignore-cd

Similar to ttya-ignore-cd, but for ttyb.

sbus-probe-list

Four digits in the format “0123” specifying which order to probe the SBus at power-up. It is unlikely that this value should ever be changed.

screen-#columns

An 8-bit integer specifying the number of columns on the console.

screen-#rows

An 8-bit integer specifying the number of rows on the console.

boot-device

Space separated list of device aliases or device paths to boot from, in the given order.

boot-file

File to boot. The empty string lets the second-stage boot program ofwboot choose the default.

auto-boot?

If true, the system will boot automatically at power-up.

watchdog-reboot?

If true, the system will reboot upon reset. Otherwise, the system will fall into the monitor.

input-device

One of the strings “keyboard”, “ttya”, or “ttyb” specifying the default console input device.

output-device

One of the strings “screen”, “ttya”, or “ttyb” specifying the default console output device.

keyboard-click?

If true, the keys click annoyingly.

network-boot-arguments

Comma separated list of arguments for booting over RARP or BOOTP/DHCP and TFTP.

sd-targets

A string in the format “31204567” describing the translation of physical to logical target.

st-targets

Similar to sd-targets, but for tapes. The default translation is “45670123”.

scsi-initiator-id

The SCSI ID of the on-board SCSI controller.

hardware-revision

A 7-character string describing a date, such as “25May95”.

last-hardware-update

Similar to hardware-revision, describing when the CPU was last updated.

diag-switch?

If true, the system will boot and run in diagnostic mode.

local-mac-address?

When set to false, all Ethernet devices will use the same system default MAC address. When true, Ethernet devices which have a unique MAC address will use it rather than the system default MAC address. This option only really affects FCode-based Ethernet devices. On Sparc64, all on-board devices, as well as plug-in hme(4) boards, will respect this setting; other hardware will not.

FILES #

/dev/openprom

the OpenPROM device

SEE ALSO #

openprom(4)

CAVEATS #

The fields and their values are not necessarily well defined on systems with an OpenPROM. Your mileage may vary.

There are a few fields known to exist in some revisions of the OpenPROM that are not yet supported. Most notable are those relating to password protection of the OpenPROM.

The date parser isn’t very intelligent.

OpenBSD 7.5 - November 9, 2022