LE(4) - Device Drivers Manual (sparc64)

LE(4) - Device Drivers Manual (sparc64) #

LE(4) - Device Drivers Manual (sparc64)

NAME #

le, ledma, lebuffer - AMD LANCE Ethernet device

SYNOPSIS #

**ledma* at sbus? ** (onboard) **le* at ledma* ** (onboard) **le* at sbus? ** (SBus) **lebuffer* at sbus? ** (SBus) **le* at lebuffer? ** (SBus)

DESCRIPTION #

The le interface provides access to the 10 Mb/s Ethernet network via the AMD Am7990 Local Area Network Controller for Ethernet (LANCE) chip set.

Different cards and machines have different kinds of connectors, as follows:

AUI/DIX

Standard 15 pin connector

10BaseT

UTP, also known as twisted pair

By default, the system will select the media type automatically, but the ifconfig(8) command can be used to force the media selection. The media types are shown below:

media autoselect

Attempt to autoselect the media type (default)

media 10base5

Use the AUI connector

media 10baseT

Use the twisted pair connector

NOTES #

Some SBus models, in particular the 501-1450 and 501-1881, have dip switches which must be changed to select between the BNC and AUI modes. For BNC, set 1-6 ON, 7-8 OFF; for AUI set 1-6 OFF, and 7-8 ON.

SEE ALSO #

arp(4), ifmedia(4), inet(4), intro(4), netintro(4), sbus(4), hostname.if(5), ifconfig(8)

HISTORY #

OpenBSD support for the le first appeared in OpenBSD 3.0.

OpenBSD 7.5 - November 21, 2015