EBUS(4) - Device Drivers Manual (sparc64) #
EBUS(4) - Device Drivers Manual (sparc64)
NAME #
ebus - introduction to SPARC EBus bus support
SYNOPSIS #
ebus* at pci? ebus* at mainbus0
DESCRIPTION #
The
ebus
bus is designed to provide the ability to put ISA and traditional
Intel-style peripherals in a SPARC based system with a minimal amount
of glue logic.
Typically, it is implemented in the PCIO IC from SME, which also
implements an
hme(4)
compatible PCI network device
(’network
’).
The
ebus
has four DMA channels, similar to the DMA seen in the
esp(4)
SCSI DMA.
OpenBSD provides support for the following devices:
audioce(4)
SPARC64 EBus CS4231 audio device
auxio(4)
SPARC64 auxiliary I/O
bbc(4)
SPARC64 BootBus Controller
beeper(4)
console annunciator
clock(4)
real-time clock
com(4)
serial communications interface
comkbd(4)
serial keyboard driver
comms(4)
serial mouse driver
led(4)
SPARC64 LED driver
lom(4)
lights out management
lpt(4)
parallel port driver
pcfiic(4)
Philips PCF8584 I2C controller
pckbc(4)
PC (ISA) keyboard controller driver
pmc(4)
power management controller
power(4)
power button
sab(4)
Infineon SAB82532 (ESCC2) serial communications driver
uperf(4)
performance counters driver
wbsd(4)
Winbond W83L518D/W83L519D SD memory card interface
SEE ALSO #
Sun Microelectronics, Peripheral Component Interconnect Input Output Controller, Part No.: 802-7837-01, http://www.sun.com/processors/manuals/802-7837.pdf, March 1997.
OpenBSD 7.5 - June 18, 2020