LII(4) - Device Drivers Manual

LII(4) - Device Drivers Manual #

LII(4) - Device Drivers Manual

NAME #

lii - Attansic L2 10/100 Ethernet device

SYNOPSIS #

lii* at pci? atphy* at mii?

DESCRIPTION #

The lii driver provides support for Ethernet interfaces based on the Attansic L2 Ethernet chipset.

The lii driver supports the following media types:

autoselect

Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the appropriate hostname.if(5) file.

10baseT

Set 10Mbps operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes.

100baseTX

Set 100Mbps (Fast Ethernet) operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes.

The lii driver supports the following media options:

full-duplex

Force full duplex operation.

half-duplex

Force half duplex operation.

For more information on configuring this device, see ifconfig(8). To view a list of media types and options supported by the card, try ifconfig <device> media. For example, ifconfig lii0 media.

SEE ALSO #

arp(4), atphy(4), ifmedia(4), intro(4), netintro(4), pci(4), hostname.if(5), ifconfig(8)

HISTORY #

The lii device driver first appeared in OpenBSD 4.3.

AUTHORS #

The lii driver was written by Quentin Garnier.

OpenBSD 7.5 - January 27, 2011