Test2::Hub(3p) Perl Programmers Reference Guide Test2::Hub(3p) #
Test2::Hub(3p) Perl Programmers Reference Guide Test2::Hub(3p)
NNAAMMEE #
Test2::Hub - The conduit through which all events flow.
SSYYNNOOPPSSIISS #
use Test2::Hub;
my $hub = Test2::Hub->new();
$hub->send(...);
DDEESSCCRRIIPPTTIIOONN #
The hub is the place where all events get processed and handed off to the
formatter. The hub also tracks test state, and provides several hooks
into the event pipeline.
CCOOMMMMOONN TTAASSKKSS #
SSEENNDDIINNGG EEVVEENNTTSS #
$hub->send($event)
The "send()" method is used to issue an event to the hub. This method
will handle thread/fork sync, filters, listeners, TAP output, etc.
AALLTTEERRIINNGG OORR RREEMMOOVVIINNGG EEVVEENNTTSS #
You can use either "filter()" or "pre_filter()", depending on your needs.
Both have identical syntax, so only "filter()" is shown here.
$hub->filter(sub {
my ($hub, $event) = @_;
my $action = get_action($event);
# No action should be taken
return $event if $action eq 'none';
# You want your filter to remove the event
return undef if $action eq 'delete';
if ($action eq 'do_it') {
my $new_event = copy_event($event);
... Change your copy of the event ...
return $new_event;
}
die "Should not happen";
});
By default, filters are not inherited by child hubs. That means if you
start a subtest, the subtest will not inherit the filter. You can change
this behavior with the "inherit" parameter:
$hub->filter(sub { ... }, inherit => 1);
LLIISSTTEENNIINNGG FFOORR EEVVEENNTTSS #
$hub->listen(sub {
my ($hub, $event, $number) = @_;
... do whatever you want with the event ...
# return is ignored
});
By default listeners are not inherited by child hubs. That means if you
start a subtest, the subtest will not inherit the listener. You can
change this behavior with the "inherit" parameter:
$hub->listen(sub { ... }, inherit => 1);
PPOOSSTT--TTEESSTT BBEEHHAAVVIIOORRSS #
$hub->follow_up(sub {
my ($trace, $hub) = @_;
... do whatever you need to ...
# Return is ignored
});
follow_up subs are called only once, either when done_testing is called,
or in an END block.
SSEETTTTIINNGG TTHHEE FFOORRMMAATTTTEERR #
By default an instance of Test2::Formatter::TAP is created and used.
my $old = $hub->format(My::Formatter->new);
Setting the formatter will REPLACE any existing formatter. You may set
the formatter to undef to prevent output. The old formatter will be
returned if one was already set. Only one formatter is allowed at a time.
MMEETTHHOODDSS #
$hub->send($event)
This is where all events enter the hub for processing.
$hub->process($event)
This is called by send after it does any IPC handling. You can use
this to bypass the IPC process, but in general you should avoid using
this.
$old = $hub->format($formatter)
Replace the existing formatter instance with a new one. Formatters
must be objects that implement a "$formatter->write($event)" method.
$sub = $hub->listen(sub { ... }, %optional_params)
You can use this to record all events AFTER they have been sent to
the formatter. No changes made here will be meaningful, except
possibly to other listeners.
$hub->listen(sub {
my ($hub, $event, $number) = @_;
... do whatever you want with the event ...
# return is ignored
});
Normally listeners are not inherited by child hubs such as subtests.
You can add the "inherit => 1" parameter to allow a listener to be
inherited.
$hub->unlisten($sub)
You can use this to remove a listen callback. You must pass in the
coderef returned by the "listen()" method.
$sub = $hub->filter(sub { ... }, %optional_params)
$sub = $hub->pre_filter(sub { ... }, %optional_params)
These can be used to add filters. Filters can modify, replace, or
remove events before anything else can see them.
$hub->filter(
sub {
my ($hub, $event) = @_;
return $event; # No Changes
return; # Remove the event
# Or you can modify an event before returning it.
$event->modify;
return $event;
}
);
If you are not using threads, forking, or IPC then the only
difference between a "filter" and a "pre_filter" is that "pre_filter"
subs run first. When you are using threads, forking, or IPC,
pre_filters happen to events before they are sent to their
destination proc/thread, ordinary filters happen only in the
destination hub/thread.
You cannot add a regular filter to a hub if the hub was created in
another process or thread. You can always add a pre_filter.
$hub->unfilter($sub)
$hub->pre_unfilter($sub)
These can be used to remove filters and pre_filters. The $sub
argument is the reference returned by "filter()" or "pre_filter()".
$hub->follow_op(sub { ... })
Use this to add behaviors that are called just before the hub is
finalized. The only argument to your codeblock will be a
Test2::EventFacet::Trace instance.
$hub->follow_up(sub {
my ($trace, $hub) = @_;
... do whatever you need to ...
# Return is ignored
});
follow_up subs are called only once, ether when done_testing is
called, or in an END block.
$sub = $hub->add_context_acquire(sub { ... });
Add a callback that will be called every time someone tries to
acquire a context. It gets a single argument, a reference of the hash
of parameters being used the construct the context. This is your
chance to change the parameters by directly altering the hash.
test2_add_callback_context_acquire(sub {
my $params = shift;
$params->{level}++;
});
This is a very scary API function. Please do not use this unless you
need to. This is here for Test::Builder and backwards compatibility.
This has you directly manipulate the hash instead of returning a new
one for performance reasons.
NNoottee Using this hook could have a huge performance impact.
The coderef you provide is returned and can be used to remove the
hook later.
$hub->remove_context_acquire($sub);
This can be used to remove a context acquire hook.
$sub = $hub->add_context_init(sub { ... });
This allows you to add callbacks that will trigger every time a new
context is created for the hub. The only argument to the sub will be
the Test2::API::Context instance that was created.
NNoottee Using this hook could have a huge performance impact.
The coderef you provide is returned and can be used to remove the
hook later.
$hub->remove_context_init($sub);
This can be used to remove a context init hook.
$sub = $hub->add_context_release(sub { ... });
This allows you to add callbacks that will trigger every time a
context for this hub is released. The only argument to the sub will
be the Test2::API::Context instance that was released. These will run
in reverse order.
NNoottee Using this hook could have a huge performance impact.
The coderef you provide is returned and can be used to remove the
hook later.
$hub->remove_context_release($sub);
This can be used to remove a context release hook.
$hub->ccuullll(())
Cull any IPC events (and process them).
$pid = $hub->ppiidd(())
Get the process id under which the hub was created.
$tid = $hub->ttiidd(())
Get the thread id under which the hub was created.
$hud = $hub->hhiidd(())
Get the identifier string of the hub.
$uuid = $hub->uuuuiidd(())
If UUID tagging is enabled (see Test2::API) then the hub will have a
UUID. #
$ipc = $hub->iippcc(())
Get the IPC object used by the hub.
$hub->set_no_ending($bool)
$bool = $hub->no_ending
This can be used to disable auto-ending behavior for a hub. The auto-
ending behavior is triggered by an end block and is used to cull IPC
events, and output the final plan if the plan was 'NO PLAN'.
$bool = $hub->active
$hub->set_active($bool)
These are used to get/set the 'active' attribute. When true this
attribute will force "hub->finalize()" to take action even if there
is no plan, and no tests have been run. This flag is useful for
plugins that add follow-up behaviors that need to run even if no
events are seen.
SSTTAATTEE MMEETTHHOODDSS #
$hub->rreesseett__ssttaattee(())
Reset all state to the start. This sets the test count to 0, clears
the plan, removes the failures, etc.
$num = $hub->count
Get the number of tests that have been run.
$num = $hub->failed
Get the number of failures (Not all failures come from a test fail,
so this number can be larger than the count).
$bool = $hub->ended
True if the testing has ended. This MAY return the stack frame of the
tool that ended the test, but that is not guaranteed.
$bool = $hub->is_passing
$hub->is_passing($bool)
Check if the overall test run is a failure. Can also be used to set
the pass/fail status.
$hub->plan($plan)
$plan = $hub->plan
Get or set the plan. The plan must be an integer larger than 0, the
string 'NO PLAN', or the string 'SKIP'.
$bool = $hub->check_plan
Check if the plan and counts match, but only if the tests have ended.
If tests have not ended this will return undef, otherwise it will be
a true/false.
TTHHIIRRDD PPAARRTTYY MMEETTAA--DDAATTAA #
This object consumes Test2::Util::ExternalMeta which provides a
consistent way for you to attach meta-data to instances of this class.
This is useful for tools, plugins, and other extensions.
SSOOUURRCCEE #
The source code repository for Test2 can be found at
_h_t_t_p_:_/_/_g_i_t_h_u_b_._c_o_m_/_T_e_s_t_-_M_o_r_e_/_t_e_s_t_-_m_o_r_e_/.
MMAAIINNTTAAIINNEERRSS #
Chad Granum <exodist@cpan.org>
AAUUTTHHOORRSS #
Chad Granum <exodist@cpan.org>
CCOOPPYYRRIIGGHHTT #
Copyright 2020 Chad Granum <exodist@cpan.org>.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
See _h_t_t_p_:_/_/_d_e_v_._p_e_r_l_._o_r_g_/_l_i_c_e_n_s_e_s_/
perl v5.36.3 2023-02-15 Test2::Hub(3p)