IO::Uncompress::RawInflate(3p) Perl Programmers Reference Guide #
IO::Uncompress::RawInflate(3p) Perl Programmers Reference Guide
NNAAMMEE #
IO::Uncompress::RawInflate - Read RFC 1951 files/buffers
SSYYNNOOPPSSIISS #
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
my $status = rawinflate $input => $output [,OPTS]
or die "rawinflate failed: $RawInflateError\n";
my $z = IO::Uncompress::RawInflate->new( $input [OPTS] )
or die "rawinflate failed: $RawInflateError\n";
$status = $z->read($buffer)
$status = $z->read($buffer, $length)
$status = $z->read($buffer, $length, $offset)
$line = $z->getline()
$char = $z->getc()
$char = $z->ungetc()
$char = $z->opened()
$status = $z->inflateSync()
$data = $z->trailingData()
$status = $z->nextStream()
$data = $z->getHeaderInfo()
$z->tell()
$z->seek($position, $whence)
$z->binmode()
$z->fileno()
$z->eof()
$z->close()
$RawInflateError ;
# IO::File mode
<$z>
read($z, $buffer);
read($z, $buffer, $length);
read($z, $buffer, $length, $offset);
tell($z)
seek($z, $position, $whence)
binmode($z)
fileno($z)
eof($z)
close($z)
DDEESSCCRRIIPPTTIIOONN #
This module provides a Perl interface that allows the reading of
files/buffers that conform to RFC 1951.
For writing RFC 1951 files/buffers, see the companion module
IO::Compress::RawDeflate.
FFuunnccttiioonnaall IInntteerrffaaccee A top-level function, “rawinflate”, is provided to carry out “one-shot” uncompression between buffers and/or files. For finer control over the uncompression process, see the “OO Interface” section.
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
rawinflate $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "rawinflate failed: $RawInflateError\n";
The functional interface needs Perl5.005 or better.
rraawwiinnffllaattee $$iinnppuutt__ffiilleennaammee__oorr__rreeffeerreennccee ==>> $$oouuttppuutt__ffiilleennaammee__oorr__rreeffeerreennccee [[,,
OOPPTTSS]] #
"rawinflate" expects at least two parameters,
$input_filename_or_reference and $output_filename_or_reference and zero
or more optional parameters (see "Optional Parameters")
_T_h_e _$_i_n_p_u_t___f_i_l_e_n_a_m_e___o_r___r_e_f_e_r_e_n_c_e _p_a_r_a_m_e_t_e_r
The parameter, $input_filename_or_reference, is used to define the source
of the compressed data.
It can take one of the following forms:
A filename
If the $input_filename_or_reference parameter is a simple scalar, it
is assumed to be a filename. This file will be opened for reading
and the input data will be read from it.
A filehandle
If the $input_filename_or_reference parameter is a filehandle, the
input data will be read from it. The string '-' can be used as an
alias for standard input.
A scalar reference
If $input_filename_or_reference is a scalar reference, the input
data will be read from $$input_filename_or_reference.
An array reference
If $input_filename_or_reference is an array reference, each element
in the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only contains
valid filenames before any data is uncompressed.
An Input FileGlob string
If $input_filename_or_reference is a string that is delimited by the
characters "<" and ">" "rawinflate" will assume that it is an _i_n_p_u_t
_f_i_l_e_g_l_o_b _s_t_r_i_n_g. The input is the list of files that match the
fileglob.
See File::GlobMapper for more details.
If the $input_filename_or_reference parameter is any other type, "undef"
will be returned.
_T_h_e _$_o_u_t_p_u_t___f_i_l_e_n_a_m_e___o_r___r_e_f_e_r_e_n_c_e _p_a_r_a_m_e_t_e_r
The parameter $output_filename_or_reference is used to control the
destination of the uncompressed data. This parameter can take one of
these forms.
A filename
If the $output_filename_or_reference parameter is a simple scalar,
it is assumed to be a filename. This file will be opened for
writing and the uncompressed data will be written to it.
A filehandle
If the $output_filename_or_reference parameter is a filehandle, the
uncompressed data will be written to it. The string '-' can be used
as an alias for standard output.
A scalar reference
If $output_filename_or_reference is a scalar reference, the
uncompressed data will be stored in $$output_filename_or_reference.
An Array Reference
If $output_filename_or_reference is an array reference, the
uncompressed data will be pushed onto the array.
An Output FileGlob
If $output_filename_or_reference is a string that is delimited by
the characters "<" and ">" "rawinflate" will assume that it is an
_o_u_t_p_u_t _f_i_l_e_g_l_o_b _s_t_r_i_n_g. The output is the list of files that match
the fileglob.
When $output_filename_or_reference is an fileglob string,
$input_filename_or_reference must also be a fileglob string.
Anything else is an error.
See File::GlobMapper for more details.
If the $output_filename_or_reference parameter is any other type, "undef"
will be returned.
NNootteess When $input_filename_or_reference maps to multiple compressed files/buffers and $output_filename_or_reference is a single file/buffer, after uncompression $output_filename_or_reference will contain a concatenation of all the uncompressed data from each of the input files/buffers.
OOppttiioonnaall PPaarraammeetteerrss The optional parameters for the one-shot function “rawinflate” are (for the most part) identical to those used with the OO interface defined in the “Constructor Options” section. The exceptions are listed below
"AutoClose => 0|1"
This option applies to any input or output data streams to
"rawinflate" that are filehandles.
If "AutoClose" is specified, and the value is true, it will result
in all input and/or output filehandles being closed once
"rawinflate" has completed.
This parameter defaults to 0.
"BinModeOut => 0|1"
This option is now a no-op. All files will be written in binmode.
"Append => 0|1"
The behaviour of this option is dependent on the type of output data
stream.
• A Buffer
If "Append" is enabled, all uncompressed data will be append to
the end of the output buffer. Otherwise the output buffer will
be cleared before any uncompressed data is written to it.
• A Filename
If "Append" is enabled, the file will be opened in append mode.
Otherwise the contents of the file, if any, will be truncated
before any uncompressed data is written to it.
• A Filehandle
If "Append" is enabled, the filehandle will be positioned to
the end of the file via a call to "seek" before any
uncompressed data is written to it. Otherwise the file pointer
will not be moved.
When "Append" is specified, and set to true, it will _a_p_p_e_n_d all
uncompressed data to the output data stream.
So when the output is a filehandle it will carry out a seek to the
eof before writing any uncompressed data. If the output is a
filename, it will be opened for appending. If the output is a
buffer, all uncompressed data will be appended to the existing
buffer.
Conversely when "Append" is not specified, or it is present and is
set to false, it will operate as follows.
When the output is a filename, it will truncate the contents of the
file before writing any uncompressed data. If the output is a
filehandle its position will not be changed. If the output is a
buffer, it will be wiped before any uncompressed data is output.
Defaults to 0.
"MultiStream => 0|1"
This option is a no-op.
"TrailingData => $scalar"
Returns the data, if any, that is present immediately after the
compressed data stream once uncompression is complete.
This option can be used when there is useful information immediately
following the compressed data stream, and you don't know the length
of the compressed data stream.
If the input is a buffer, "trailingData" will return everything from
the end of the compressed data stream to the end of the buffer.
If the input is a filehandle, "trailingData" will return the data
that is left in the filehandle input buffer once the end of the
compressed data stream has been reached. You can then use the
filehandle to read the rest of the input file.
Don't bother using "trailingData" if the input is a filename.
If you know the length of the compressed data stream before you
start uncompressing, you can avoid having to use "trailingData" by
setting the "InputLength" option.
EExxaammpplleess To read the contents of the file “file1.txt.1951” and write the uncompressed data to the file “file1.txt”.
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
my $input = "file1.txt.1951";
my $output = "file1.txt";
rawinflate $input => $output
or die "rawinflate failed: $RawInflateError\n";
To read from an existing Perl filehandle, $input, and write the
uncompressed data to a buffer, $buffer.
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
use IO::File ;
my $input = IO::File->new( "<file1.txt.1951" )
or die "Cannot open 'file1.txt.1951': $!\n" ;
my $buffer ;
rawinflate $input => \$buffer
or die "rawinflate failed: $RawInflateError\n";
To uncompress all files in the directory "/my/home" that match
"*.txt.1951" and store the compressed data in the same directory
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
rawinflate '</my/home/*.txt.1951>' => '</my/home/#1.txt>'
or die "rawinflate failed: $RawInflateError\n";
and if you want to compress each file one at a time, this will do the
trick
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
for my $input ( glob "/my/home/*.txt.1951" )
{
my $output = $input;
$output =~ s/.1951// ;
rawinflate $input => $output
or die "Error compressing '$input': $RawInflateError\n";
}
OOOO IInntteerrffaaccee CCoonnssttrruuccttoorr The format of the constructor for IO::Uncompress::RawInflate is shown below
my $z = IO::Uncompress::RawInflate->new( $input [OPTS] )
or die "IO::Uncompress::RawInflate failed: $RawInflateError\n";
Returns an "IO::Uncompress::RawInflate" object on success and undef on
failure. The variable $RawInflateError will contain an error message on
failure.
If you are running Perl 5.005 or better the object, $z, returned from
IO::Uncompress::RawInflate can be used exactly like an IO::File
filehandle. This means that all normal input file operations can be
carried out with $z. For example, to read a line from a compressed
file/buffer you can use either of these forms
$line = $z->getline();
$line = <$z>;
The mandatory parameter $input is used to determine the source of the
compressed data. This parameter can take one of three forms.
A filename
If the $input parameter is a scalar, it is assumed to be a filename.
This file will be opened for reading and the compressed data will be
read from it.
A filehandle
If the $input parameter is a filehandle, the compressed data will be
read from it. The string '-' can be used as an alias for standard
input.
A scalar reference
If $input is a scalar reference, the compressed data will be read
from $$input.
CCoonnssttrruuccttoorr OOppttiioonnss The option names defined below are case insensitive and can be optionally prefixed by a ‘-’. So all of the following are valid
-AutoClose
-autoclose
AUTOCLOSE #
autoclose
OPTS is a combination of the following options:
"AutoClose => 0|1"
This option is only valid when the $input parameter is a filehandle.
If specified, and the value is true, it will result in the file
being closed once either the "close" method is called or the
IO::Uncompress::RawInflate object is destroyed.
This parameter defaults to 0.
"MultiStream => 0|1"
Allows multiple concatenated compressed streams to be treated as a
single compressed stream. Decompression will stop once either the
end of the file/buffer is reached, an error is encountered
(premature eof, corrupt compressed data) or the end of a stream is
not immediately followed by the start of another stream.
This parameter defaults to 0.
"Prime => $string"
This option will uncompress the contents of $string before
processing the input file/buffer.
This option can be useful when the compressed data is embedded in
another file/data structure and it is not possible to work out where
the compressed data begins without having to read the first few
bytes. If this is the case, the uncompression can be _p_r_i_m_e_d with
these bytes using this option.
"Transparent => 0|1"
If this option is set and the input file/buffer is not compressed
data, the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data
and there is non-compressed data immediately following it, setting
this option will make this module treat the whole file/buffer as a
single data stream.
This option defaults to 1.
"BlockSize => $num"
When reading the compressed input data, IO::Uncompress::RawInflate
will read it in blocks of $num bytes.
This option defaults to 4096.
"InputLength => $size"
When present this option will limit the number of compressed bytes
read from the input file/buffer to $size. This option can be used in
the situation where there is useful data directly after the
compressed data stream and you know beforehand the exact length of
the compressed data stream.
This option is mostly used when reading from a filehandle, in which
case the file pointer will be left pointing to the first byte
directly after the compressed data stream.
This option defaults to off.
"Append => 0|1"
This option controls what the "read" method does with uncompressed
data.
If set to 1, all uncompressed data will be appended to the output
parameter of the "read" method.
If set to 0, the contents of the output parameter of the "read"
method will be overwritten by the uncompressed data.
Defaults to 0.
"Strict => 0|1"
This option is a no-op.
EExxaammpplleess
TODO #
MMeetthhooddss rreeaadd Usage is
$status = $z->read($buffer)
Reads a block of compressed data (the size of the compressed block is
determined by the "Buffer" option in the constructor), uncompresses it
and writes any uncompressed data into $buffer. If the "Append" parameter
is set in the constructor, the uncompressed data will be appended to the
$buffer parameter. Otherwise $buffer will be overwritten.
Returns the number of uncompressed bytes written to $buffer, zero if eof
or a negative number on error.
rreeaadd Usage is
$status = $z->read($buffer, $length)
$status = $z->read($buffer, $length, $offset)
$status = read($z, $buffer, $length)
$status = read($z, $buffer, $length, $offset)
Attempt to read $length bytes of uncompressed data into $buffer.
The main difference between this form of the "read" method and the
previous one, is that this one will attempt to return _e_x_a_c_t_l_y $length
bytes. The only circumstances that this function will not is if end-of-
file or an IO error is encountered.
Returns the number of uncompressed bytes written to $buffer, zero if eof
or a negative number on error.
ggeettlliinnee Usage is
$line = $z->getline()
$line = <$z>
Reads a single line.
This method fully supports the use of the variable $/ (or
$INPUT_RECORD_SEPARATOR or $RS when "English" is in use) to determine
what constitutes an end of line. Paragraph mode, record mode and file
slurp mode are all supported.
ggeettcc Usage is
$char = $z->getc()
Read a single character.
uunnggeettcc Usage is
$char = $z->ungetc($string)
iinnffllaatteeSSyynncc Usage is
$status = $z->inflateSync()
TODO #
ggeettHHeeaaddeerrIInnffoo Usage is
$hdr = $z->getHeaderInfo();
@hdrs = $z->getHeaderInfo();
This method returns either a hash reference (in scalar context) or a list
or hash references (in array context) that contains information about
each of the header fields in the compressed data stream(s).
tteellll Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
eeooff Usage is
$z->eof();
eof($z);
Returns true if the end of the compressed input stream has been reached.
sseeeekk $z->seek($position, $whence); seek($z, $position, $whence);
Provides a sub-set of the "seek" functionality, with the restriction that
it is only legal to seek forward in the input file/buffer. It is a fatal
error to attempt to seek backward.
Note that the implementation of "seek" in this module does not provide
true random access to a compressed file/buffer. It works by
uncompressing data from the current offset in the file/buffer until it
reaches the uncompressed offset specified in the parameters to "seek".
For very small files this may be acceptable behaviour. For large files it
may cause an unacceptable delay.
The $whence parameter takes one the usual values, namely SEEK_SET,
SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
bbiinnmmooddee Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
ooppeenneedd $z->opened()
Returns true if the object currently refers to a opened file/buffer.
aauuttoofflluusshh my $prev = $z->autoflush() my $prev = $z->autoflush(EXPR)
If the $z object is associated with a file or a filehandle, this method
returns the current autoflush setting for the underlying filehandle. If
"EXPR" is present, and is non-zero, it will enable flushing after every
write/print operation.
If $z is associated with a buffer, this method has no effect and always
returns "undef".
NNoottee that the special variable $| ccaannnnoott be used to set or retrieve the
autoflush setting.
iinnppuutt__lliinnee__nnuummbbeerr $z->input_line_number() $z->input_line_number(EXPR)
Returns the current uncompressed line number. If "EXPR" is present it has
the effect of setting the line number. Note that setting the line number
does not change the current position within the file/buffer being read.
The contents of $/ are used to determine what constitutes a line
terminator.
ffiilleennoo $z->fileno() fileno($z)
If the $z object is associated with a file or a filehandle, "fileno" will
return the underlying file descriptor. Once the "close" method is called
"fileno" will return "undef".
If the $z object is associated with a buffer, this method will return
"undef".
cclloossee $z->close() ; close $z ;
Closes the output file/buffer.
For most versions of Perl this method will be automatically invoked if
the IO::Uncompress::RawInflate object is destroyed (either explicitly or
by the variable with the reference to the object going out of scope). The
exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In these
cases, the "close" method will be called automatically, but not until
global destruction of all live objects when the program is terminating.
Therefore, if you want your scripts to be able to run on all versions of
Perl, you should call "close" explicitly and not rely on automatic
closing.
Returns true on success, otherwise 0.
If the "AutoClose" option has been enabled when the
IO::Uncompress::RawInflate object was created, and the object is
associated with a file, the underlying file will also be closed.
nneexxttSSttrreeaamm Usage is
my $status = $z->nextStream();
Skips to the next compressed data stream in the input file/buffer. If a
new compressed data stream is found, the eof marker will be cleared and
$. will be reset to 0.
Returns 1 if a new stream was found, 0 if none was found, and -1 if an
error was encountered.
ttrraaiilliinnggDDaattaa Usage is
my $data = $z->trailingData();
Returns the data, if any, that is present immediately after the
compressed data stream once uncompression is complete. It only makes
sense to call this method once the end of the compressed data stream has
been encountered.
This option can be used when there is useful information immediately
following the compressed data stream, and you don't know the length of
the compressed data stream.
If the input is a buffer, "trailingData" will return everything from the
end of the compressed data stream to the end of the buffer.
If the input is a filehandle, "trailingData" will return the data that is
left in the filehandle input buffer once the end of the compressed data
stream has been reached. You can then use the filehandle to read the rest
of the input file.
Don't bother using "trailingData" if the input is a filename.
If you know the length of the compressed data stream before you start
uncompressing, you can avoid having to use "trailingData" by setting the
"InputLength" option in the constructor.
IImmppoorrttiinngg No symbolic constants are required by IO::Uncompress::RawInflate at present.
:all Imports "rawinflate" and $RawInflateError. Same as doing this
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
EEXXAAMMPPLLEESS #
WWoorrkkiinngg wwiitthh NNeett::::FFTTPP See IO::Compress::FAQ
SSUUPPPPOORRTT #
General feedback/questions/bug reports should be sent to
<https://github.com/pmqs/IO-Compress/issues> (preferred) or
<https://rt.cpan.org/Public/Dist/Display.html?Name=IO-Compress>.
SSEEEE AALLSSOO #
Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip,
IO::Compress::Deflate, IO::Uncompress::Inflate, IO::Compress::RawDeflate,
IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma,
IO::Uncompress::UnLzma, IO::Compress::Xz, IO::Uncompress::UnXz,
IO::Compress::Lzip, IO::Uncompress::UnLzip, IO::Compress::Lzop,
IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf,
IO::Compress::Zstd, IO::Uncompress::UnZstd, IO::Uncompress::AnyInflate,
IO::Uncompress::AnyUncompress
IO::Compress::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see
<https://datatracker.ietf.org/doc/html/rfc1950>,
<https://datatracker.ietf.org/doc/html/rfc1951> and
<https://datatracker.ietf.org/doc/html/rfc1952>
The _z_l_i_b compression library was written by Jean-loup Gailly
"gzip@prep.ai.mit.edu" and Mark Adler "madler@alumni.caltech.edu".
The primary site for the _z_l_i_b compression library is
<http://www.zlib.org>.
The primary site for gzip is <http://www.gzip.org>.
AAUUTTHHOORR #
This module was written by Paul Marquess, "pmqs@cpan.org".
MMOODDIIFFIICCAATTIIOONN HHIISSTTOORRYY #
See the Changes file.
CCOOPPYYRRIIGGHHTT AANNDD LLIICCEENNSSEE #
Copyright (c) 2005-2022 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
perl v5.36.3 2023-02-15 IO::Uncompress::RawInflate(3p)