constant(3p) Perl Programmers Reference Guide constant(3p) #
constant(3p) Perl Programmers Reference Guide constant(3p)
NNAAMMEE #
constant - Perl pragma to declare constants
SSYYNNOOPPSSIISS #
use constant PI => 4 * atan2(1, 1);
use constant DEBUG => 0;
print "Pi equals ", PI, "...\n" if DEBUG;
use constant {
SEC => 0, #
MIN => 1, #
HOUR => 2, #
MDAY => 3, #
MON => 4, #
YEAR => 5, #
WDAY => 6, #
YDAY => 7, #
ISDST => 8, #
};
use constant WEEKDAYS => qw(
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
);
print "Today is ", (WEEKDAYS)[ (localtime)[WDAY] ], ".\n";
DDEESSCCRRIIPPTTIIOONN #
This pragma allows you to declare constants at compile-time.
When you declare a constant such as "PI" using the method shown above,
each machine your script runs upon can have as many digits of accuracy as
it can use. Also, your program will be easier to read, more likely to be
maintained (and maintained correctly), and far less likely to send a
space probe to the wrong planet because nobody noticed the one equation
in which you wrote 3.14195.
When a constant is used in an expression, Perl replaces it with its value
at compile time, and may then optimize the expression further. In
particular, any code in an "if (CONSTANT)" block will be optimized away
if the constant is false.
NNOOTTEESS #
As with all "use" directives, defining a constant happens at compile
time. Thus, it's probably not correct to put a constant declaration
inside of a conditional statement (like "if ($foo) { use constant ...
}").
Constants defined using this module cannot be interpolated into strings
like variables. However, concatenation works just fine:
print "Pi equals PI...\n"; # WRONG: does not expand "PI"
print "Pi equals ".PI."...\n"; # right
Even though a reference may be declared as a constant, the reference may
point to data which may be changed, as this code shows.
use constant ARRAY => [ 1,2,3,4 ];
print ARRAY->[1];
ARRAY->[1] = " be changed";
print ARRAY->[1];
Constants belong to the package they are defined in. To refer to a
constant defined in another package, specify the full package name, as in
"Some::Package::CONSTANT". Constants may be exported by modules, and may
also be called as either class or instance methods, that is, as
"Some::Package->CONSTANT" or as "$obj->CONSTANT" where $obj is an
instance of "Some::Package". Subclasses may define their own constants
to override those in their base class.
As of version 1.32 of this module, constants can be defined in packages
other than the caller, by including the package name in the name of the
constant:
use constant "OtherPackage::FWIBBLE" => 7865;
constant->import("Other::FWOBBLE",$value); # dynamically at run time
The use of all caps for constant names is merely a convention, although
it is recommended in order to make constants stand out and to help avoid
collisions with other barewords, keywords, and subroutine names.
Constant names must begin with a letter or underscore. Names beginning
with a double underscore are reserved. Some poor choices for names will
generate warnings, if warnings are enabled at compile time.
LLiisstt ccoonnssttaannttss Constants may be lists of more (or less) than one value. A constant with no values evaluates to “undef” in scalar context. Note that constants with more than one value do _n_o_t return their last value in scalar context as one might expect. They currently return the number of values, but tthhiiss mmaayy cchhaannggee iinn tthhee ffuuttuurree. Do not use constants with multiple values in scalar context.
NNOOTTEE:: This implies that the expression defining the value of a constant
is evaluated in list context. This may produce surprises:
use constant TIMESTAMP => localtime; # WRONG!
use constant TIMESTAMP => scalar localtime; # right
The first line above defines "TIMESTAMP" as a 9-element list, as returned
by "localtime()" in list context. To set it to the string returned by
"localtime()" in scalar context, an explicit "scalar" keyword is
required.
List constants are lists, not arrays. To index or slice them, they must
be placed in parentheses.
my @workdays = WEEKDAYS[1 .. 5]; # WRONG!
my @workdays = (WEEKDAYS)[1 .. 5]; # right
DDeeffiinniinngg mmuullttiippllee ccoonnssttaannttss aatt oonnccee Instead of writing multiple “use constant” statements, you may define multiple constants in a single statement by giving, instead of the constant name, a reference to a hash where the keys are the names of the constants to be defined. Obviously, all constants defined using this method must have a single value.
use constant {
FOO => "A single value",
BAR => "This", "won't", "work!", # Error!
};
This is a fundamental limitation of the way hashes are constructed in
Perl. The error messages produced when this happens will often be quite
cryptic -- in the worst case there may be none at all, and you'll only
later find that something is broken.
When defining multiple constants, you cannot use the values of other
constants defined in the same declaration. This is because the calling
package doesn't know about any constant within that group until _a_f_t_e_r the
"use" statement is finished.
use constant {
BITMASK => 0xAFBAEBA8,
NEGMASK => ~BITMASK, # Error!
};
MMaaggiicc ccoonnssttaannttss Magical values and references can be made into constants at compile time, allowing for way cool stuff like this. (These error numbers aren’t totally portable, alas.)
use constant E2BIG => ($! = 7);
print E2BIG, "\n"; # something like "Arg list too long"
print 0+E2BIG, "\n"; # "7"
You can't produce a tied constant by giving a tied scalar as the value.
References to tied variables, however, can be used as constants without
any problems.
TTEECCHHNNIICCAALL NNOOTTEESS #
In the current implementation, scalar constants are actually inlinable
subroutines. As of version 5.004 of Perl, the appropriate scalar
constant is inserted directly in place of some subroutine calls, thereby
saving the overhead of a subroutine call. See "Constant Functions" in
perlsub for details about how and when this happens.
In the rare case in which you need to discover at run time whether a
particular constant has been declared via this module, you may use this
function to examine the hash %constant::declared. If the given constant
name does not include a package name, the current package is used.
sub declared ($) {
use constant 1.01; # don't omit this!
my $name = shift;
$name =~ s/^::/main::/;
my $pkg = caller;
my $full_name = $name =~ /::/ ? $name : "${pkg}::$name";
$constant::declared{$full_name};
}
CCAAVVEEAATTSS #
List constants are not inlined unless you are using Perl v5.20 or higher.
In v5.20 or higher, they are still not read-only, but that may change in
future versions.
It is not possible to have a subroutine or a keyword with the same name
as a constant in the same package. This is probably a Good Thing.
A constant with a name in the list "STDIN STDOUT STDERR ARGV ARGVOUT ENV
INC SIG" is not allowed anywhere but in package "main::", for technical
reasons.
Unlike constants in some languages, these cannot be overridden on the
command line or via environment variables.
You can get into trouble if you use constants in a context which
automatically quotes barewords (as is true for any subroutine call). For
example, you can't say $hash{CONSTANT} because "CONSTANT" will be
interpreted as a string. Use $hash{CONSTANT()} or $hash{+CONSTANT} to
prevent the bareword quoting mechanism from kicking in. Similarly, since
the "=>" operator quotes a bareword immediately to its left, you have to
say "CONSTANT() => 'value'" (or simply use a comma in place of the big
arrow) instead of "CONSTANT => 'value'".
SSEEEE AALLSSOO #
Readonly - Facility for creating read-only scalars, arrays, hashes.
Attribute::Constant - Make read-only variables via attribute
Scalar::Readonly - Perl extension to the "SvREADONLY" scalar flag
Hash::Util - A selection of general-utility hash subroutines (mostly to
lock/unlock keys and values)
BBUUGGSS #
Please report any bugs or feature requests via the ppeerrllbbuugg(1) utility.
AAUUTTHHOORRSS #
Tom Phoenix, <_r_o_o_t_b_e_e_r_@_r_e_d_c_a_t_._c_o_m>, with help from many other folks.
Multiple constant declarations at once added by Casey West,
<_c_a_s_e_y_@_g_e_e_k_n_e_s_t_._c_o_m>.
Documentation mostly rewritten by Ilmari Karonen, <_p_e_r_l_@_i_t_z_._p_p_._s_c_i_._f_i>.
This program is maintained by the Perl 5 Porters. The CPAN distribution
is maintained by Sébastien Aperghis-Tramoni <_s_e_b_a_s_t_i_e_n_@_a_p_e_r_g_h_i_s_._n_e_t>.
CCOOPPYYRRIIGGHHTT && LLIICCEENNSSEE #
Copyright (C) 1997, 1999 Tom Phoenix
This module is free software; you can redistribute it or modify it under
the same terms as Perl itself.
perl v5.36.3 2017-02-05 constant(3p)