PERLRECHARCLASS(1) Perl Programmers Reference Guide PERLRECHARCLASS(1) #
PERLRECHARCLASS(1) Perl Programmers Reference Guide PERLRECHARCLASS(1)
NNAAMMEE #
perlrecharclass - Perl Regular Expression Character Classes
DDEESSCCRRIIPPTTIIOONN #
The top level documentation about Perl regular expressions is found in
perlre.
This manual page discusses the syntax and use of character classes in
Perl regular expressions.
A character class is a way of denoting a set of characters in such a way
that one character of the set is matched. It's important to remember
that: matching a character class consumes exactly one character in the
source string. (The source string is the string the regular expression is
matched against.)
There are three types of character classes in Perl regular expressions:
the dot, backslash sequences, and the form enclosed in square brackets.
Keep in mind, though, that often the term "character class" is used to
mean just the bracketed form. Certainly, most Perl documentation does
that.
TThhee ddoott The dot (or period), “.” is probably the most used, and certainly the most well-known character class. By default, a dot matches any character, except for the newline. That default can be changed to add matching the newline by using the _s_i_n_g_l_e _l_i_n_e modifier: for the entire regular expression with the “/s” modifier, or locally with “(?s)” (and even globally within the scope of “use re ‘/s’”). (The “\N” backslash sequence, described below, matches any character except newline without regard to the _s_i_n_g_l_e _l_i_n_e modifier.)
Here are some examples:
"a" =~ /./ # Match
"." =~ /./ # Match
"" =~ /./ # No match (dot has to match a character)
"\n" =~ /./ # No match (dot does not match a newline)
"\n" =~ /./s # Match (global 'single line' modifier)
"\n" =~ /(?s:.)/ # Match (local 'single line' modifier)
"ab" =~ /^.$/ # No match (dot matches one character)
BBaacckkssllaasshh sseeqquueenncceess A backslash sequence is a sequence of characters, the first one of which is a backslash. Perl ascribes special meaning to many such sequences, and some of these are character classes. That is, they match a single character each, provided that the character belongs to the specific set of characters defined by the sequence.
Here's a list of the backslash sequences that are character classes.
They are discussed in more detail below. (For the backslash sequences
that aren't character classes, see perlrebackslash.)
\d Match a decimal digit character.
\D Match a non-decimal-digit character.
\w Match a "word" character.
\W Match a non-"word" character.
\s Match a whitespace character.
\S Match a non-whitespace character.
\h Match a horizontal whitespace character.
\H Match a character that isn't horizontal whitespace.
\v Match a vertical whitespace character.
\V Match a character that isn't vertical whitespace.
\N Match a character that isn't a newline.
\pP, \p{Prop} Match a character that has the given Unicode property.
\PP, \P{Prop} Match a character that doesn't have the Unicode property
__N #
"\N", available starting in v5.12, like the dot, matches any character
that is not a newline. The difference is that "\N" is not influenced by
the _s_i_n_g_l_e _l_i_n_e regular expression modifier (see "The dot" above). Note
that the form "\N{...}" may mean something completely different. When
the "{...}" is a quantifier, it means to match a non-newline character
that many times. For example, "\N{3}" means to match 3 non-newlines;
"\N{5,}" means to match 5 or more non-newlines. But if "{...}" is not a
legal quantifier, it is presumed to be a named character. See charnames
for those. For example, none of "\N{COLON}", "\N{4F}", and "\N{F4}"
contain legal quantifiers, so Perl will try to find characters whose
names are respectively "COLON", "4F", and "F4".
_D_i_g_i_t_s
"\d" matches a single character considered to be a decimal _d_i_g_i_t. If the
"/a" regular expression modifier is in effect, it matches [0-9].
Otherwise, it matches anything that is matched by "\p{Digit}", which
includes [0-9]. (An unlikely possible exception is that under locale
matching rules, the current locale might not have "[0-9]" matched by
"\d", and/or might match other characters whose code point is less than
256. The only such locale definitions that are legal would be to match
"[0-9]" plus another set of 10 consecutive digit characters; anything
else would be in violation of the C language standard, but Perl doesn't
currently assume anything in regard to this.)
What this means is that unless the "/a" modifier is in effect "\d" not
only matches the digits '0' - '9', but also Arabic, Devanagari, and
digits from other languages. This may cause some confusion, and some
security issues.
Some digits that "\d" matches look like some of the [0-9] ones, but have
different values. For example, BENGALI DIGIT FOUR (U+09EA) looks very
much like an ASCII DIGIT EIGHT (U+0038), and LEPCHA DIGIT SIX (U+1C46)
looks very much like an ASCII DIGIT FIVE (U+0035). An application that
is expecting only the ASCII digits might be misled, or if the match is
"\d+", the matched string might contain a mixture of digits from
different writing systems that look like they signify a number different
than they actually do. "nnuumm(())" in Unicode::UCD can be used to safely
calculate the value, returning "undef" if the input string contains such
a mixture. Otherwise, for example, a displayed price might be
deliberately different than it appears.
What "\p{Digit}" means (and hence "\d" except under the "/a" modifier) is
"\p{General_Category=Decimal_Number}", or synonymously,
"\p{General_Category=Digit}". Starting with Unicode version 4.1, this is
the same set of characters matched by "\p{Numeric_Type=Decimal}". But
Unicode also has a different property with a similar name,
"\p{Numeric_Type=Digit}", which matches a completely different set of
characters. These characters are things such as "CIRCLED DIGIT ONE" or
subscripts, or are from writing systems that lack all ten digits.
The design intent is for "\d" to exactly match the set of characters that
can safely be used with "normal" big-endian positional decimal syntax,
where, for example 123 means one 'hundred', plus two 'tens', plus three
'ones'. This positional notation does not necessarily apply to
characters that match the other type of "digit",
"\p{Numeric_Type=Digit}", and so "\d" doesn't match them.
The Tamil digits (U+0BE6 - U+0BEF) can also legally be used in old-style
Tamil numbers in which they would appear no more than one in a row,
separated by characters that mean "times 10", "times 100", etc. (See
<https://www.unicode.org/notes/tn21>.)
Any character not matched by "\d" is matched by "\D".
_W_o_r_d _c_h_a_r_a_c_t_e_r_s
A "\w" matches a single alphanumeric character (an alphabetic character,
or a decimal digit); or a connecting punctuation character, such as an
underscore ("_"); or a "mark" character (like some sort of accent) that
attaches to one of those. It does not match a whole word. To match a
whole word, use "\w+". This isn't the same thing as matching an English
word, but in the ASCII range it is the same as a string of Perl-
identifier characters.
If the "/a" modifier is in effect ...
"\w" matches the 63 characters [a-zA-Z0-9_].
otherwise ...
For code points above 255 ...
"\w" matches the same as "\p{Word}" matches in this range. That
is, it matches Thai letters, Greek letters, etc. This includes
connector punctuation (like the underscore) which connect two
words together, or diacritics, such as a "COMBINING TILDE" and
the modifier letters, which are generally used to add auxiliary
markings to letters.
For code points below 256 ...
if locale rules are in effect ...
"\w" matches the platform's native underscore character plus
whatever the locale considers to be alphanumeric.
if, instead, Unicode rules are in effect ...
"\w" matches exactly what "\p{Word}" matches.
otherwise ...
"\w" matches [a-zA-Z0-9_].
Which rules apply are determined as described in "Which character set
modifier is in effect?" in perlre.
There are a number of security issues with the full Unicode list of word
characters. See <http://unicode.org/reports/tr36>.
Also, for a somewhat finer-grained set of characters that are in
programming language identifiers beyond the ASCII range, you may wish to
instead use the more customized "Unicode Properties", "\p{ID_Start}",
"\p{ID_Continue}", "\p{XID_Start}", and "\p{XID_Continue}". See
<http://unicode.org/reports/tr31>.
Any character not matched by "\w" is matched by "\W".
_W_h_i_t_e_s_p_a_c_e
"\s" matches any single character considered whitespace.
If the "/a" modifier is in effect ...
In all Perl versions, "\s" matches the 5 characters [\t\n\f\r ]; that
is, the horizontal tab, the newline, the form feed, the carriage
return, and the space. Starting in Perl v5.18, it also matches the
vertical tab, "\cK". See note "[1]" below for a discussion of this.
otherwise ...
For code points above 255 ...
"\s" matches exactly the code points above 255 shown with an "s"
column in the table below.
For code points below 256 ...
if locale rules are in effect ...
"\s" matches whatever the locale considers to be whitespace.
if, instead, Unicode rules are in effect ...
"\s" matches exactly the characters shown with an "s" column
in the table below.
otherwise ...
"\s" matches [\t\n\f\r ] and, starting in Perl v5.18, the
vertical tab, "\cK". (See note "[1]" below for a discussion
of this.) Note that this list doesn't include the non-
breaking space.
Which rules apply are determined as described in "Which character set
modifier is in effect?" in perlre.
Any character not matched by "\s" is matched by "\S".
"\h" matches any character considered horizontal whitespace; this
includes the platform's space and tab characters and several others
listed in the table below. "\H" matches any character not considered
horizontal whitespace. They use the platform's native character set, and
do not consider any locale that may otherwise be in use.
"\v" matches any character considered vertical whitespace; this includes
the platform's carriage return and line feed characters (newline) plus
several other characters, all listed in the table below. "\V" matches
any character not considered vertical whitespace. They use the
platform's native character set, and do not consider any locale that may
otherwise be in use.
"\R" matches anything that can be considered a newline under Unicode
rules. It can match a multi-character sequence. It cannot be used inside
a bracketed character class; use "\v" instead (vertical whitespace). It
uses the platform's native character set, and does not consider any
locale that may otherwise be in use. Details are discussed in
perlrebackslash.
Note that unlike "\s" (and "\d" and "\w"), "\h" and "\v" always match the
same characters, without regard to other factors, such as the active
locale or whether the source string is in UTF-8 format.
One might think that "\s" is equivalent to "[\h\v]". This is indeed true
starting in Perl v5.18, but prior to that, the sole difference was that
the vertical tab ("\cK") was not matched by "\s".
The following table is a complete listing of characters matched by "\s",
"\h" and "\v" as of Unicode 14.0.
The first column gives the Unicode code point of the character (in hex
format), the second column gives the (Unicode) name. The third column
indicates by which class(es) the character is matched (assuming no locale
is in effect that changes the "\s" matching).
0x0009 CHARACTER TABULATION h s
0x000a LINE FEED (LF) vs
0x000b LINE TABULATION vs [1]
0x000c FORM FEED (FF) vs
0x000d CARRIAGE RETURN (CR) vs
0x0020 SPACE h s
0x0085 NEXT LINE (NEL) vs [2]
0x00a0 NO-BREAK SPACE h s [2]
0x1680 OGHAM SPACE MARK h s
0x2000 EN QUAD h s
0x2001 EM QUAD h s
0x2002 EN SPACE h s
0x2003 EM SPACE h s
0x2004 THREE-PER-EM SPACE h s
0x2005 FOUR-PER-EM SPACE h s
0x2006 SIX-PER-EM SPACE h s
0x2007 FIGURE SPACE h s
0x2008 PUNCTUATION SPACE h s
0x2009 THIN SPACE h s
0x200a HAIR SPACE h s
0x2028 LINE SEPARATOR vs
0x2029 PARAGRAPH SEPARATOR vs
0x202f NARROW NO-BREAK SPACE h s
0x205f MEDIUM MATHEMATICAL SPACE h s
0x3000 IDEOGRAPHIC SPACE h s
[1] Prior to Perl v5.18, "\s" did not match the vertical tab. "[^\S\cK]"
(obscurely) matches what "\s" traditionally did.
[2] NEXT LINE and NO-BREAK SPACE may or may not match "\s" depending on
the rules in effect. See the beginning of this section.
_U_n_i_c_o_d_e _P_r_o_p_e_r_t_i_e_s
"\pP" and "\p{Prop}" are character classes to match characters that fit
given Unicode properties. One letter property names can be used in the
"\pP" form, with the property name following the "\p", otherwise, braces
are required. When using braces, there is a single form, which is just
the property name enclosed in the braces, and a compound form which looks
like "\p{name=value}", which means to match if the property "name" for
the character has that particular "value". For instance, a match for a
number can be written as "/\pN/" or as "/\p{Number}/", or as
"/\p{Number=True}/". Lowercase letters are matched by the property
_L_o_w_e_r_c_a_s_e___L_e_t_t_e_r which has the short form _L_l. They need the braces, so
are written as "/\p{Ll}/" or "/\p{Lowercase_Letter}/", or
"/\p{General_Category=Lowercase_Letter}/" (the underscores are optional).
"/\pLl/" is valid, but means something different. It matches a two
character string: a letter (Unicode property "\pL"), followed by a
lowercase "l".
What a Unicode property matches is never subject to locale rules, and if
locale rules are not otherwise in effect, the use of a Unicode property
will force the regular expression into using Unicode rules, if it isn't
already.
Note that almost all properties are immune to case-insensitive matching.
That is, adding a "/i" regular expression modifier does not change what
they match. But there are two sets that are affected. The first set is
"Uppercase_Letter", "Lowercase_Letter", and "Titlecase_Letter", all of
which match "Cased_Letter" under "/i" matching. The second set is
"Uppercase", "Lowercase", and "Titlecase", all of which match "Cased"
under "/i" matching. (The difference between these sets is that some
things, such as Roman numerals, come in both upper and lower case, so
they are "Cased", but aren't considered to be letters, so they aren't
"Cased_Letter"s. They're actually "Letter_Number"s.) This set also
includes its subsets "PosixUpper" and "PosixLower", both of which under
"/i" match "PosixAlpha".
For more details on Unicode properties, see "Unicode Character
Properties" in perlunicode; for a complete list of possible properties,
see "Properties accessible through \p{} and \P{}" in perluniprops, which
notes all forms that have "/i" differences. It is also possible to
define your own properties. This is discussed in "User-Defined Character
Properties" in perlunicode.
Unicode properties are defined (surprise!) only on Unicode code points.
Starting in v5.20, when matching against "\p" and "\P", Perl treats non-
Unicode code points (those above the legal Unicode maximum of 0x10FFFF)
as if they were typical unassigned Unicode code points.
Prior to v5.20, Perl raised a warning and made all matches fail on non-
Unicode code points. This could be somewhat surprising:
chr(0x110000) =~ \p{ASCII_Hex_Digit=True} # Fails on Perls < v5.20.
chr(0x110000) =~ \p{ASCII_Hex_Digit=False} # Also fails on Perls
# < v5.20
Even though these two matches might be thought of as complements, until
v5.20 they were so only on Unicode code points.
Starting in perl v5.30, wildcards are allowed in Unicode property values.
See "Wildcards in Property Values" in perlunicode.
Examples
"a" =~ /\w/ # Match, "a" is a 'word' character.
"7" =~ /\w/ # Match, "7" is a 'word' character as well.
"a" =~ /\d/ # No match, "a" isn't a digit.
"7" =~ /\d/ # Match, "7" is a digit.
" " =~ /\s/ # Match, a space is whitespace.
"a" =~ /\D/ # Match, "a" is a non-digit.
"7" =~ /\D/ # No match, "7" is not a non-digit.
" " =~ /\S/ # No match, a space is not non-whitespace.
" " =~ /\h/ # Match, space is horizontal whitespace.
" " =~ /\v/ # No match, space is not vertical whitespace.
"\r" =~ /\v/ # Match, a return is vertical whitespace.
"a" =~ /\pL/ # Match, "a" is a letter.
"a" =~ /\p{Lu}/ # No match, /\p{Lu}/ matches upper case letters.
"\x{0e0b}" =~ /\p{Thai}/ # Match, \x{0e0b} is the character
# 'THAI CHARACTER SO SO', and that's in
# Thai Unicode class.
"a" =~ /\P{Lao}/ # Match, as "a" is not a Laotian character.
It is worth emphasizing that "\d", "\w", etc, match single characters,
not complete numbers or words. To match a number (that consists of
digits), use "\d+"; to match a word, use "\w+". But be aware of the
security considerations in doing so, as mentioned above.
BBrraacckkeetteedd CChhaarraacctteerr CCllaasssseess The third form of character class you can use in Perl regular expressions is the bracketed character class. In its simplest form, it lists the characters that may be matched, surrounded by square brackets, like this: “[aeiou]”. This matches one of “a”, “e”, “i”, “o” or “u”. Like the other character classes, exactly one character is matched.* To match a longer string consisting of characters mentioned in the character class, follow the character class with a quantifier. For instance, “[aeiou]+” matches one or more lowercase English vowels.
Repeating a character in a character class has no effect; it's considered
to be in the set only once.
Examples:
"e" =~ /[aeiou]/ # Match, as "e" is listed in the class.
"p" =~ /[aeiou]/ # No match, "p" is not listed in the class.
"ae" =~ /^[aeiou]$/ # No match, a character class only matches
# a single character.
"ae" =~ /^[aeiou]+$/ # Match, due to the quantifier.
-------
* There are two exceptions to a bracketed character class matching a
single character only. Each requires special handling by Perl to make
things work:
• When the class is to match caselessly under "/i" matching rules, and
a character that is explicitly mentioned inside the class matches a
multiple-character sequence caselessly under Unicode rules, the class
will also match that sequence. For example, Unicode says that the
letter "LATIN SMALL LETTER SHARP S" should match the sequence "ss"
under "/i" rules. Thus,
'ss' =~ /\A\N{LATIN SMALL LETTER SHARP S}\z/i # Matches
'ss' =~ /\A[aeioust\N{LATIN SMALL LETTER SHARP S}]\z/i # Matches
For this to happen, the class must not be inverted (see "Negation")
and the character must be explicitly specified, and not be part of a
multi-character range (not even as one of its endpoints).
("Character Ranges" will be explained shortly.) Therefore,
'ss' =~ /\A[\0-\x{ff}]\z/ui # Doesn't match
'ss' =~ /\A[\0-\N{LATIN SMALL LETTER SHARP S}]\z/ui # No match
'ss' =~ /\A[\xDF-\xDF]\z/ui # Matches on ASCII platforms, since
# \xDF is LATIN SMALL LETTER SHARP S,
# and the range is just a single
# element
Note that it isn't a good idea to specify these types of ranges
anyway.
• Some names known to "\N{...}" refer to a sequence of multiple
characters, instead of the usual single character. When one of these
is included in the class, the entire sequence is matched. For
example,
“\N{TAMIL LETTER KA}\N{TAMIL VOWEL SIGN AU}” #
=~ / ^ [\N{TAMIL SYLLABLE KAU}] $ /x;
matches, because "\N{TAMIL SYLLABLE KAU}" is a named sequence
consisting of the two characters matched against. Like the other
instance where a bracketed class can match multiple characters, and
for similar reasons, the class must not be inverted, and the named
sequence may not appear in a range, even one where it is both
endpoints. If these happen, it is a fatal error if the character
class is within the scope of "use re 'strict", or within an extended
"(?[...])" class; otherwise only the first code point is used (with a
"regexp"-type warning raised).
_S_p_e_c_i_a_l _C_h_a_r_a_c_t_e_r_s _I_n_s_i_d_e _a _B_r_a_c_k_e_t_e_d _C_h_a_r_a_c_t_e_r _C_l_a_s_s
Most characters that are meta characters in regular expressions (that is,
characters that carry a special meaning like ".", "*", or "(") lose their
special meaning and can be used inside a character class without the need
to escape them. For instance, "[()]" matches either an opening
parenthesis, or a closing parenthesis, and the parens inside the
character class don't group or capture. Be aware that, unless the
pattern is evaluated in single-quotish context, variable interpolation
will take place before the bracketed class is parsed:
$, = "\t| ";
$a =~ m'[$,]'; # single-quotish: matches '$' or ','
$a =~ q{[$,]}' # same
$a =~ m/[$,]/; # double-quotish: Because we made an
# assignment to $, above, this now
# matches "\t", "|", or " "
Characters that may carry a special meaning inside a character class are:
"\", "^", "-", "[" and "]", and are discussed below. They can be escaped
with a backslash, although this is sometimes not needed, in which case
the backslash may be omitted.
The sequence "\b" is special inside a bracketed character class. While
outside the character class, "\b" is an assertion indicating a point that
does not have either two word characters or two non-word characters on
either side, inside a bracketed character class, "\b" matches a backspace
character.
The sequences "\a", "\c", "\e", "\f", "\n", "\N{_N_A_M_E}", "\N{U+_h_e_x _c_h_a_r}",
"\r", "\t", and "\x" are also special and have the same meanings as they
do outside a bracketed character class.
Also, a backslash followed by two or three octal digits is considered an
octal number.
A "[" is not special inside a character class, unless it's the start of a
POSIX character class (see "POSIX Character Classes" below). It normally
does not need escaping.
A "]" is normally either the end of a POSIX character class (see "POSIX
Character Classes" below), or it signals the end of the bracketed
character class. If you want to include a "]" in the set of characters,
you must generally escape it.
However, if the "]" is the _f_i_r_s_t (or the second if the first character is
a caret) character of a bracketed character class, it does not denote the
end of the class (as you cannot have an empty class) and is considered
part of the set of characters that can be matched without escaping.
Examples:
"+" =~ /[+?*]/ # Match, "+" in a character class is not special.
"\cH" =~ /[\b]/ # Match, \b inside in a character class
# is equivalent to a backspace.
"]" =~ /[][]/ # Match, as the character class contains
# both [ and ].
"[]" =~ /[[]]/ # Match, the pattern contains a character class
# containing just [, and the character class is
# followed by a ].
_B_r_a_c_k_e_t_e_d _C_h_a_r_a_c_t_e_r _C_l_a_s_s_e_s _a_n_d _t_h_e _"_/_x_x_" _p_a_t_t_e_r_n _m_o_d_i_f_i_e_r
Normally SPACE and TAB characters have no special meaning inside a
bracketed character class; they are just added to the list of characters
matched by the class. But if the "/xx" pattern modifier is in effect,
they are generally ignored and can be added to improve readability. They
can't be added in the middle of a single construct:
/ [ \x{10 FFFF} ] /xx # WRONG!
The SPACE in the middle of the hex constant is illegal.
To specify a literal SPACE character, you can escape it with a backslash,
like:
/[ a e i o u \ ]/xx
This matches the English vowels plus the SPACE character.
For clarity, you should already have been using "\t" to specify a literal
tab, and "\t" is unaffected by "/xx".
_C_h_a_r_a_c_t_e_r _R_a_n_g_e_s
It is not uncommon to want to match a range of characters. Luckily,
instead of listing all characters in the range, one may use the hyphen
("-"). If inside a bracketed character class you have two characters
separated by a hyphen, it's treated as if all characters between the two
were in the class. For instance, "[0-9]" matches any ASCII digit, and
"[a-m]" matches any lowercase letter from the first half of the ASCII
alphabet.
Note that the two characters on either side of the hyphen are not
necessarily both letters or both digits. Any character is possible,
although not advisable. "['-?]" contains a range of characters, but most
people will not know which characters that means. Furthermore, such
ranges may lead to portability problems if the code has to run on a
platform that uses a different character set, such as EBCDIC.
If a hyphen in a character class cannot syntactically be part of a range,
for instance because it is the first or the last character of the
character class, or if it immediately follows a range, the hyphen isn't
special, and so is considered a character to be matched literally. If
you want a hyphen in your set of characters to be matched and its
position in the class is such that it could be considered part of a
range, you must escape that hyphen with a backslash.
Examples:
[a-z] # Matches a character that is a lower case ASCII letter.
[a-fz] # Matches any letter between 'a' and 'f' (inclusive) or
# the letter 'z'.
[-z] # Matches either a hyphen ('-') or the letter 'z'.
[a-f-m] # Matches any letter between 'a' and 'f' (inclusive), the
# hyphen ('-'), or the letter 'm'.
['-?] # Matches any of the characters '()*+,-./0123456789:;<=>?
# (But not on an EBCDIC platform).
[\N{APOSTROPHE}-\N{QUESTION MARK}] #
# Matches any of the characters '()*+,-./0123456789:;<=>?
# even on an EBCDIC platform.
[\N{U+27}-\N{U+3F}] # Same. (U+27 is "'", and U+3F is "?")
As the final two examples above show, you can achieve portability to non-
ASCII platforms by using the "\N{...}" form for the range endpoints.
These indicate that the specified range is to be interpreted using
Unicode values, so "[\N{U+27}-\N{U+3F}]" means to match "\N{U+27}",
"\N{U+28}", "\N{U+29}", ..., "\N{U+3D}", "\N{U+3E}", and "\N{U+3F}",
whatever the native code point versions for those are. These are called
"Unicode" ranges. If either end is of the "\N{...}" form, the range is
considered Unicode. A "regexp" warning is raised under "use re 'strict'"
if the other endpoint is specified non-portably:
[\N{U+00}-\x09] # Warning under re 'strict'; \x09 is non-portable
[\N{U+00}-\t] # No warning;
Both of the above match the characters "\N{U+00}" "\N{U+01}", ...
"\N{U+08}", "\N{U+09}", but the "\x09" looks like it could be a mistake
so the warning is raised (under "re 'strict'") for it.
Perl also guarantees that the ranges "A-Z", "a-z", "0-9", and any
subranges of these match what an English-only speaker would expect them
to match on any platform. That is, "[A-Z]" matches the 26 ASCII
uppercase letters; "[a-z]" matches the 26 lowercase letters; and "[0-9]"
matches the 10 digits. Subranges, like "[h-k]", match correspondingly,
in this case just the four letters "h", "i", "j", and "k". This is the
natural behavior on ASCII platforms where the code points (ordinal
values) for "h" through "k" are consecutive integers (0x68 through 0x6B).
But special handling to achieve this may be needed on platforms with a
non-ASCII native character set. For example, on EBCDIC platforms, the
code point for "h" is 0x88, "i" is 0x89, "j" is 0x91, and "k" is 0x92.
Perl specially treats "[h-k]" to exclude the seven code points in the
gap: 0x8A through 0x90. This special handling is only invoked when the
range is a subrange of one of the ASCII uppercase, lowercase, and digit
ranges, AND each end of the range is expressed either as a literal, like
"A", or as a named character ("\N{...}", including the "\N{U+..." form).
EBCDIC Examples:
[i-j] # Matches either "i" or "j"
[i-\N{LATIN SMALL LETTER J}] # Same
[i-\N{U+6A}] # Same
[\N{U+69}-\N{U+6A}] # Same
[\x{89}-\x{91}] # Matches 0x89 ("i"), 0x8A .. 0x90, 0x91 ("j")
[i-\x{91}] # Same
[\x{89}-j] # Same
[i-J] # Matches, 0x89 ("i") .. 0xC1 ("J"); special
# handling doesn't apply because range is mixed
# case
_N_e_g_a_t_i_o_n
It is also possible to instead list the characters you do not want to
match. You can do so by using a caret ("^") as the first character in the
character class. For instance, "[^a-z]" matches any character that is not
a lowercase ASCII letter, which therefore includes more than a million
Unicode code points. The class is said to be "negated" or "inverted".
This syntax make the caret a special character inside a bracketed
character class, but only if it is the first character of the class. So
if you want the caret as one of the characters to match, either escape
the caret or else don't list it first.
In inverted bracketed character classes, Perl ignores the Unicode rules
that normally say that named sequence, and certain characters should
match a sequence of multiple characters use under caseless "/i" matching.
Following those rules could lead to highly confusing situations:
"ss" =~ /^[^\xDF]+$/ui; # Matches!
This should match any sequences of characters that aren't "\xDF" nor what
"\xDF" matches under "/i". "s" isn't "\xDF", but Unicode says that "ss"
is what "\xDF" matches under "/i". So which one "wins"? Do you fail the
match because the string has "ss" or accept it because it has an "s"
followed by another "s"? Perl has chosen the latter. (See note in
"Bracketed Character Classes" above.)
Examples:
"e" =~ /[^aeiou]/ # No match, the 'e' is listed.
"x" =~ /[^aeiou]/ # Match, as 'x' isn't a lowercase vowel.
"^" =~ /[^^]/ # No match, matches anything that isn't a caret.
"^" =~ /[x^]/ # Match, caret is not special here.
_B_a_c_k_s_l_a_s_h _S_e_q_u_e_n_c_e_s
You can put any backslash sequence character class (with the exception of
"\N" and "\R") inside a bracketed character class, and it will act just
as if you had put all characters matched by the backslash sequence inside
the character class. For instance, "[a-f\d]" matches any decimal digit,
or any of the lowercase letters between 'a' and 'f' inclusive.
"\N" within a bracketed character class must be of the forms "\N{_n_a_m_e}"
or "\N{U+_h_e_x _c_h_a_r}", and NOT be the form that matches non-newlines, for
the same reason that a dot "." inside a bracketed character class loses
its special meaning: it matches nearly anything, which generally isn't
what you want to happen.
Examples:
/[\p{Thai}\d]/ # Matches a character that is either a Thai
# character, or a digit.
/[^\p{Arabic}()]/ # Matches a character that is neither an Arabic
# character, nor a parenthesis.
Backslash sequence character classes cannot form one of the endpoints of
a range. Thus, you can't say:
/[\p{Thai}-\d]/ # Wrong!
_P_O_S_I_X _C_h_a_r_a_c_t_e_r _C_l_a_s_s_e_s
POSIX character classes have the form "[:class:]", where _c_l_a_s_s is the
name, and the "[:" and ":]" delimiters. POSIX character classes only
appear _i_n_s_i_d_e bracketed character classes, and are a convenient and
descriptive way of listing a group of characters.
Be careful about the syntax,
# Correct:
$string =~ /[[:alpha:]]/
# Incorrect (will warn):
$string =~ /[:alpha:]/
The latter pattern would be a character class consisting of a colon, and
the letters "a", "l", "p" and "h".
POSIX character classes can be part of a larger bracketed character
class. For example,
[01[:alpha:]%]
is valid and matches '0', '1', any alphabetic character, and the percent
sign.
Perl recognizes the following POSIX character classes:
alpha Any alphabetical character (e.g., [A-Za-z]).
alnum Any alphanumeric character (e.g., [A-Za-z0-9]).
ascii Any character in the ASCII character set.
blank A GNU extension, equal to a space or a horizontal tab ("\t").
cntrl Any control character. See Note [2] below.
digit Any decimal digit (e.g., [0-9]), equivalent to "\d".
graph Any printable character, excluding a space. See Note [3] below.
lower Any lowercase character (e.g., [a-z]).
print Any printable character, including a space. See Note [4] below.
punct Any graphical character excluding "word" characters. Note [5].
space Any whitespace character. "\s" including the vertical tab
("\cK").
upper Any uppercase character (e.g., [A-Z]).
word A Perl extension (e.g., [A-Za-z0-9_]), equivalent to "\w".
xdigit Any hexadecimal digit (e.g., [0-9a-fA-F]). Note [7].
Like the Unicode properties, most of the POSIX properties match the same
regardless of whether case-insensitive ("/i") matching is in effect or
not. The two exceptions are "[:upper:]" and "[:lower:]". Under "/i",
they each match the union of "[:upper:]" and "[:lower:]".
Most POSIX character classes have two Unicode-style "\p" property
counterparts. (They are not official Unicode properties, but Perl
extensions derived from official Unicode properties.) The table below
shows the relation between POSIX character classes and these
counterparts.
One counterpart, in the column labelled "ASCII-range Unicode" in the
table, matches only characters in the ASCII character set.
The other counterpart, in the column labelled "Full-range Unicode",
matches any appropriate characters in the full Unicode character set.
For example, "\p{Alpha}" matches not just the ASCII alphabetic
characters, but any character in the entire Unicode character set
considered alphabetic. An entry in the column labelled "backslash
sequence" is a (short) equivalent.
[[:...:]] ASCII-range Full-range backslash Note
Unicode Unicode sequence
-----------------------------------------------------
alpha \p{PosixAlpha} \p{XPosixAlpha}
alnum \p{PosixAlnum} \p{XPosixAlnum}
ascii \p{ASCII}
blank \p{PosixBlank} \p{XPosixBlank} \h [1]
or \p{HorizSpace} [1]
cntrl \p{PosixCntrl} \p{XPosixCntrl} [2]
digit \p{PosixDigit} \p{XPosixDigit} \d
graph \p{PosixGraph} \p{XPosixGraph} [3]
lower \p{PosixLower} \p{XPosixLower}
print \p{PosixPrint} \p{XPosixPrint} [4]
punct \p{PosixPunct} \p{XPosixPunct} [5]
\p{PerlSpace} \p{XPerlSpace} \s [6]
space \p{PosixSpace} \p{XPosixSpace} [6]
upper \p{PosixUpper} \p{XPosixUpper}
word \p{PosixWord} \p{XPosixWord} \w
xdigit \p{PosixXDigit} \p{XPosixXDigit} [7]
[1] "\p{Blank}" and "\p{HorizSpace}" are synonyms.
[2] Control characters don't produce output as such, but instead usually
control the terminal somehow: for example, newline and backspace are
control characters. On ASCII platforms, in the ASCII range,
characters whose code points are between 0 and 31 inclusive, plus 127
("DEL") are control characters; on EBCDIC platforms, their
counterparts are control characters.
[3] Any character that is _g_r_a_p_h_i_c_a_l, that is, visible. This class
consists of all alphanumeric characters and all punctuation
characters.
[4] All printable characters, which is the set of all graphical
characters plus those whitespace characters which are not also
controls.
[5] "\p{PosixPunct}" and "[[:punct:]]" in the ASCII range match all non-
controls, non-alphanumeric, non-space characters:
"[-!"#$%&'()*+,./:;<=>?@[\\\]^_`{|}~]" (although if a locale is in
effect, it could alter the behavior of "[[:punct:]]").
The similarly named property, "\p{Punct}", matches a somewhat
different set in the ASCII range, namely
"[-!"#%&'()*,./:;?@[\\\]_{}]". That is, it is missing the nine
characters "[$+<=>^`|~]". This is because Unicode splits what POSIX
considers to be punctuation into two categories, Punctuation and
Symbols.
"\p{XPosixPunct}" and (under Unicode rules) "[[:punct:]]", match what
"\p{PosixPunct}" matches in the ASCII range, plus what "\p{Punct}"
matches. This is different than strictly matching according to
"\p{Punct}". Another way to say it is that if Unicode rules are in
effect, "[[:punct:]]" matches all characters that Unicode considers
punctuation, plus all ASCII-range characters that Unicode considers
symbols.
[6] "\p{XPerlSpace}" and "\p{Space}" match identically starting with Perl
v5.18. In earlier versions, these differ only in that in non-locale
matching, "\p{XPerlSpace}" did not match the vertical tab, "\cK".
Same for the two ASCII-only range forms.
[7] Unlike "[[:digit:]]" which matches digits in many writing systems,
such as Thai and Devanagari, there are currently only two sets of
hexadecimal digits, and it is unlikely that more will be added. This
is because you not only need the ten digits, but also the six "[A-F]"
(and "[a-f]") to correspond. That means only the Latin script is
suitable for these, and Unicode has only two sets of these, the
familiar ASCII set, and the fullwidth forms starting at U+FF10
(FULLWIDTH DIGIT ZERO). #
There are various other synonyms that can be used besides the names
listed in the table. For example, "\p{XPosixAlpha}" can be written as
"\p{Alpha}". All are listed in "Properties accessible through \p{} and
\P{}" in perluniprops.
Both the "\p" counterparts always assume Unicode rules are in effect. On
ASCII platforms, this means they assume that the code points from 128 to
255 are Latin-1, and that means that using them under locale rules is
unwise unless the locale is guaranteed to be Latin-1 or UTF-8. In
contrast, the POSIX character classes are useful under locale rules.
They are affected by the actual rules in effect, as follows:
If the "/a" modifier, is in effect ...
Each of the POSIX classes matches exactly the same as their ASCII-
range counterparts.
otherwise ...
For code points above 255 ...
The POSIX class matches the same as its Full-range counterpart.
For code points below 256 ...
if locale rules are in effect ...
The POSIX class matches according to the locale, except:
"word"
also includes the platform's native underscore character,
no matter what the locale is.
"ascii"
on platforms that don't have the POSIX "ascii" extension,
this matches just the platform's native ASCII-range
characters.
"blank"
on platforms that don't have the POSIX "blank" extension,
this matches just the platform's native tab and space
characters.
if, instead, Unicode rules are in effect ...
The POSIX class matches the same as the Full-range
counterpart.
otherwise ...
The POSIX class matches the same as the ASCII range
counterpart.
Which rules apply are determined as described in "Which character set
modifier is in effect?" in perlre.
Negation of POSIX character classes
A Perl extension to the POSIX character class is the ability to negate
it. This is done by prefixing the class name with a caret ("^"). Some
examples:
POSIX ASCII-range Full-range backslash
Unicode Unicode sequence
-----------------------------------------------------
[[:^digit:]] \P{PosixDigit} \P{XPosixDigit} \D
[[:^space:]] \P{PosixSpace} \P{XPosixSpace}
\P{PerlSpace} \P{XPerlSpace} \S
[[:^word:]] \P{PerlWord} \P{XPosixWord} \W
The backslash sequence can mean either ASCII- or Full-range Unicode,
depending on various factors as described in "Which character set
modifier is in effect?" in perlre.
[= =] and [. .]
Perl recognizes the POSIX character classes "[=class=]" and "[.class.]",
but does not (yet?) support them. Any attempt to use either construct
raises an exception.
Examples
/[[:digit:]]/ # Matches a character that is a digit.
/[01[:lower:]]/ # Matches a character that is either a
# lowercase letter, or '0' or '1'.
/[[:digit:][:^xdigit:]]/ # Matches a character that can be anything
# except the letters 'a' to 'f' and 'A' to
# 'F'. This is because the main character
# class is composed of two POSIX character
# classes that are ORed together, one that
# matches any digit, and the other that
# matches anything that isn't a hex digit.
# The OR adds the digits, leaving only the
# letters 'a' to 'f' and 'A' to 'F' excluded.
_E_x_t_e_n_d_e_d _B_r_a_c_k_e_t_e_d _C_h_a_r_a_c_t_e_r _C_l_a_s_s_e_s
This is a fancy bracketed character class that can be used for more
readable and less error-prone classes, and to perform set operations,
such as intersection. An example is
/(?[ \p{Thai} & \p{Digit} ])/
This will match all the digit characters that are in the Thai script.
This feature became available in Perl 5.18, as experimental; accepted in
5.36.
The rules used by "use re 'strict" apply to this construct.
We can extend the example above:
/(?[ ( \p{Thai} + \p{Lao} ) & \p{Digit} ])/
This matches digits that are in either the Thai or Laotian scripts.
Notice the white space in these examples. This construct always has the
"/xx" modifier turned on within it.
The available binary operators are:
& intersection
+ union
| another name for '+', hence means union
- subtraction (the result matches the set consisting of those
code points matched by the first operand, excluding any that
are also matched by the second operand)
^ symmetric difference (the union minus the intersection). This
is like an exclusive or, in that the result is the set of code
points that are matched by either, but not both, of the
operands.
There is one unary operator:
! complement
All the binary operators left associate; "&" is higher precedence than
the others, which all have equal precedence. The unary operator right
associates, and has highest precedence. Thus this follows the normal
Perl precedence rules for logical operators. Use parentheses to override
the default precedence and associativity.
The main restriction is that everything is a metacharacter. Thus, you
cannot refer to single characters by doing something like this:
/(?[ a + b ])/ # Syntax error!
The easiest way to specify an individual typable character is to enclose
it in brackets:
/(?[ [a] + [b] ])/
(This is the same thing as "[ab]".) You could also have said the
equivalent:
/(?[[ a b ]])/
(You can, of course, specify single characters by using, "\x{...}",
"\N{...}", etc.)
This last example shows the use of this construct to specify an ordinary
bracketed character class without additional set operations. Note the
white space within it. This is allowed because "/xx" is automatically
turned on within this construct.
All the other escapes accepted by normal bracketed character classes are
accepted here as well.
Because this construct compiles under "use re 'strict", unrecognized
escapes that generate warnings in normal classes are fatal errors here,
as well as all other warnings from these class elements, as well as some
practices that don't currently warn outside "re 'strict'". For example
you cannot say
/(?[ [ \xF ] ])/ # Syntax error!
You have to have two hex digits after a braceless "\x" (use a leading
zero to make two). These restrictions are to lower the incidence of
typos causing the class to not match what you thought it would.
If a regular bracketed character class contains a "\p{}" or "\P{}" and is
matched against a non-Unicode code point, a warning may be raised, as the
result is not Unicode-defined. No such warning will come when using this
extended form.
The final difference between regular bracketed character classes and
these, is that it is not possible to get these to match a multi-character
fold. Thus,
/(?[ [\xDF] ])/iu
does not match the string "ss".
You don't have to enclose POSIX class names inside double brackets, hence
both of the following work:
/(?[ [:word:] - [:lower:] ])/
/(?[ [[:word:]] - [[:lower:]] ])/
Any contained POSIX character classes, including things like "\w" and
"\D" respect the "/a" (and "/aa") modifiers.
Note that "(?[ ])" is a regex-compile-time construct. Any attempt to use
something which isn't knowable at the time the containing regular
expression is compiled is a fatal error. In practice, this means just
three limitations:
1. When compiled within the scope of "use locale" (or the "/l" regex
modifier), this construct assumes that the execution-time locale will
be a UTF-8 one, and the generated pattern always uses Unicode rules.
What gets matched or not thus isn't dependent on the actual runtime
locale, so tainting is not enabled. But a "locale" category warning
is raised if the runtime locale turns out to not be UTF-8.
2. Any user-defined property used must be already defined by the time
the regular expression is compiled (but note that this construct can
be used instead of such properties).
3. A regular expression that otherwise would compile using "/d" rules,
and which uses this construct will instead use "/u". Thus this
construct tells Perl that you don't want "/d" rules for the entire
regular expression containing it.
Note that skipping white space applies only to the interior of this
construct. There must not be any space between any of the characters
that form the initial "(?[". Nor may there be space between the closing
"])" characters.
Just as in all regular expressions, the pattern can be built up by
including variables that are interpolated at regex compilation time. But
currently each such sub-component should be an already-compiled extended
bracketed character class.
my $thai_or_lao = qr/(?[ \p{Thai} + \p{Lao} ])/;
...
qr/(?[ \p{Digit} & $thai_or_lao ])/;
If you interpolate something else, the pattern may still compile (or it
may die), but if it compiles, it very well may not behave as you would
expect:
my $thai_or_lao = '\p{Thai} + \p{Lao}';
qr/(?[ \p{Digit} & $thai_or_lao ])/;
compiles to
qr/(?[ \p{Digit} & \p{Thai} + \p{Lao} ])/;
This does not have the effect that someone reading the source code would
likely expect, as the intersection applies just to "\p{Thai}", excluding
the Laotian.
Due to the way that Perl parses things, your parentheses and brackets may
need to be balanced, even including comments. If you run into any
examples, please submit them to <https://github.com/Perl/perl5/issues>,
so that we can have a concrete example for this man page.
perl v5.36.3 2023-02-15 PERLRECHARCLASS(1)